Call Anderson Industrial Roofing at (866) 949-8016 for roof inspection in Flower Mound, TX.

Money-Saving Problems Found in a Roof Inspection

Though initially small, roof issues have a habit of becoming large, expensive issues when not identified and handled in a timely manner.

Hail and Storm Damage

Spring storms across North Texas regularly bring hail capable of bruising or puncturing a commercial flat roof membrane. The problem is that this damage often does not produce an immediate leak. A hail strike can compromise the membrane’s surface without creating a visible opening, allowing moisture to work its way into the layers below over the following weeks or months as the impact point degrades further. By the time a leak appears inside the building, the damage has typically spread well beyond the original impact area.

A roof inspection following any significant storm event identifies impact points while they are still isolated. An inspector trained to recognize the subtle signs of hail bruising, such as soft spots or surface granule displacement, can flag these areas for repair before water intrusion begins. This single step prevents what would otherwise become a much larger and more expensive repair months later.

Drainage Failures That Lead to Ponding Water

Flat commercial roofs depend entirely on functioning drains, scuppers, and internal gutters to move water off the surface. When these components become blocked by debris or shift out of proper alignment, water begins to pool on the roof instead of draining away. Ponding water that sits for extended periods accelerates membrane breakdown, adds significant structural weight, and creates ideal conditions for further deterioration in the affected area.

This is a problem that develops gradually and is easy to miss without a dedicated inspection. A property manager walking the roof casually may not notice a partially blocked drain until ponding has already become a recurring issue. A trained inspector checks every drainage point as a matter of routine, clearing minor blockages on the spot and flagging more serious drainage problems before they cause lasting membrane damage.

Seam and Flashing Failures Before They Become Leaks

Membrane seams and flashing details at penetrations, curbs, and parapet walls are the most common points of failure on any flat commercial roof. Thermal cycling between Flower Mound’s hot summers and cooler winter nights places ongoing stress on these connections, and over time, seams can begin to separate or flashing sealants can crack and pull away. None of this is necessarily visible from the ground or from inside the building until water has already found its way through.

A roof inspection examines these vulnerable points directly, checking seam integrity along their full length and verifying that flashing remains properly sealed at every transition. Catching a seam that has just begun to lift, or a flashing detail with an early crack, allows for a small, targeted repair instead of waiting for a full leak to develop and cause interior damage.

Roof Inspection in Flower Mound, TX

The problems that damage commercial roofs in Flower Mound rarely announce themselves clearly. Hail bruising, drainage blockages, and seam fatigue all develop quietly, and a regular inspection schedule is what catches them before they turn into expensive repairs or interior water damage. For roof inspection in Flower Mound, TX contact Anderson Industrial Roofing at (866) 949-8016 today.

FAQ

How soon after a hailstorm should a commercial roof in Flower Mound be inspected?
Within a few days of any significant hail event. Hail damage to a flat membrane is often not visible from the ground and may not produce an interior leak for weeks or months. An inspection shortly after the storm gives the best chance of identifying impact points before they worsen.

Can a roof inspection catch a problem before it causes a leak?
Yes, that is the primary value of a scheduled inspection. Issues such as early seam separation, cracked flashing sealant, and partially blocked drains can all be identified and addressed before they progress to the point of allowing water into the building.

What happens if ponding water on a flat roof is left unaddressed?
Standing water accelerates membrane degradation at the affected area, adds substantial weight to the roof structure, and increases the likelihood of a leak developing at that location. Left unresolved over multiple seasons, ponding water is one of the more common causes of premature membrane failure on commercial flat roofs.

The post Roof Inspection Flower Mound, TX first appeared on Anderson Industrial Roofing.

Anderson Industrial Roofing provides roof maintenance services for commercial properties in Frisco, TX. Call (866) 949-8016 to learn more about maintenance solutions designed to support long-term roof performance and reliability.

Proactive roof maintenance helps extend roof lifespan, improve system performance, and maintain dependable protection for commercial buildings throughout the year.

Roof Maintenance During the DFW Spring Storm Season

Spring weather across the Dallas-Fort Worth area often brings thunderstorms, hail, heavy rain, and strong winds. These conditions can place significant stress on commercial roofing systems in a relatively short period of time.

Seasonal roof maintenance before storm season focuses on identifying vulnerable areas that could worsen during severe weather. Roofing professionals inspect flashing, seams, drainage components, and rooftop penetrations to verify that the roof is prepared for heavy rainfall and wind exposure.

After major storms, maintenance inspections help identify damage that may not be visible from the ground. Hail impacts can weaken roofing materials, while wind-driven debris may puncture or scrape membrane surfaces. Early detection helps property owners address problems before leaks develop.

Preparing Roof Maintenance Plans for North Texas Summers

Summer heat is one of the most demanding conditions commercial roofs experience in Frisco. Flat roofing systems absorb significant solar energy throughout the day, causing roofing materials to expand under high temperatures.

As evening temperatures drop, those same materials contract. This repeated movement is known as thermal cycling. Over time, thermal cycling can place stress on seams, flashing details, and areas surrounding rooftop equipment.

Summer-focused roof maintenance helps identify signs of heat-related wear before they become larger concerns. Technicians often inspect membrane surfaces for cracking, shrinking, or separation while evaluating areas that receive the greatest sun exposure throughout the day.

Roof Maintenance and Drainage Performance

Rainfall patterns in Frisco can create challenges for commercial drainage systems. Sudden storms often deposit large amounts of water in a short period, making proper drainage essential for roof performance.

Drainage inspections are a key part of seasonal roof maintenance. Leaves, dirt, and storm debris can accumulate around drains and scuppers, slowing water movement across the roof. Even partial blockages can contribute to standing water after storms.

Maintenance visits also help identify low areas where water tends to collect. Monitoring these locations allows property owners to address drainage concerns before ponding water accelerates membrane deterioration or contributes to leaks.

Fall Roof Maintenance Before Winter Weather Arrives

Although winters in Frisco are generally moderate, cold fronts and freezing temperatures still affect commercial roofing systems. Fall is an ideal time to evaluate roof conditions before seasonal weather changes occur.

Pre-winter maintenance inspections often focus on sealants, flashing, drainage systems, and any repairs completed earlier in the year. Small cracks or deteriorated components may become more vulnerable as temperatures fluctuate.

Addressing minor issues during the fall season helps reduce the likelihood of moisture intrusion and weather-related damage during winter months. A proactive approach allows property owners to enter the colder season with greater confidence in roof performance.

The Long-Term Benefits of Roof Maintenance

Roof maintenance helps commercial property owners stay ahead of roofing issues caused by weather, drainage concerns, and normal system wear. In Frisco, TX, commercial roofs are exposed to storms, intense heat, and seasonal temperature changes that can gradually affect roofing performance over time. Regular maintenance helps identify developing concerns before they lead to costly repairs or operational disruptions.

Anderson Industrial Roofing provides roof maintenance services for commercial properties in Frisco, TX. Call (866) 949-8016 to discuss maintenance solutions designed to protect your roofing investment.

A structured roof maintenance program can help extend roof lifespan, improve system reliability, and reduce unexpected repair expenses while supporting long-term building protection.

FAQ

How often should a commercial roof be maintained in the Frisco, TX area?
Most commercial roofs should be professionally inspected and maintained at least twice each year, typically in spring and fall. Additional inspections are recommended following major hailstorms or severe weather events.

What maintenance tasks should be completed before summer heat peaks in North Texas?
Property owners should have roofing seams, flashing, drainage systems, rooftop penetrations, and membrane surfaces evaluated before peak temperatures arrive. Addressing minor issues early can help reduce heat-related deterioration.

How do temperature swings in Frisco affect flat roofing membranes over time?
Daily expansion and contraction caused by changing temperatures can gradually stress roofing materials. Over time, this movement may contribute to seam separation, flashing wear, and other conditions that increase the risk of leaks.

The post Roof Maintenance Frisco, TX first appeared on Anderson Industrial Roofing.

Building a Roof Inspection Program for Dallas Commercial Properties

A structured inspection program starts with establishing the right cadence for the property and its roofing system. Most commercial flat roofs benefit from professional evaluations at least twice per year, with additional visits following major storm events. For Dallas properties, aligning inspections with the end of spring storm season and the end of summer gives contractors the opportunity to assess weather-related wear at its peak accumulation point, before conditions become favorable again and developing issues have time to worsen.

Newer roofing systems in good condition may require less frequent professional attention, while aging membranes, roofs with documented repair histories, or properties in heavy-use industrial settings benefit from more regular evaluations. A contractor experienced with the specific system in place can help property managers determine the right frequency and structure a service agreement that reflects the building’s actual condition and maintenance history.

What Happens During a Scheduled Roof Inspection

During a scheduled roof inspection, the contractor evaluates all major components of the roofing system rather than responding to a single reported symptom. The membrane surface is checked for blistering, punctures, and surface erosion, and seams are examined for separation or lifting along their full length. Flashing details at parapet walls, curbs, and penetrations are assessed for gaps or sealant failure that could allow water entry at connection points.

Drainage components receive close attention in Dallas, where heavy rain events can deliver significant water volume over a short period. Drains, scuppers, and overflow relief points are checked for debris accumulation and confirmed to be functioning as designed. Rooftop equipment bases, pipe boots, and conduit entry points are also inspected, since penetrations are among the most common locations for moisture intrusion across all flat membrane types.

Inspection Records Support Long-Term Roof Management

Each scheduled inspection produces documentation that builds in value over time. Written reports with photographs create a running record of the roof’s condition, noting which areas have been repaired, which are being monitored, and how the system is performing relative to its age and expected service life. This history is useful when planning capital expenditures, evaluating warranty requirements, and deciding whether targeted repairs or a broader replacement makes sense for a given section of the roof.

Inspection records also carry practical value when storm damage results in an insurance claim. A documented baseline showing the roof’s pre-storm condition helps distinguish normal wear from newly caused damage, which can be a point of disagreement in hail-prone markets like Dallas. Property managers who keep consistent inspection records are better positioned to support claims and demonstrate that the property has been actively maintained throughout the life of the roofing system.

Roof Inspection in Dallas, TX

A maintenance-oriented approach to commercial roof care keeps repair costs predictable, limits the frequency of emergency work, and extends system performance over the full expected service life. Regular inspection visits give property managers the information they need to plan ahead rather than react to problems as they surface. For roof inspection in Dallas, TX contact Anderson Industrial Roofing at (866) 949-8016 today.

FAQ

What does a commercial roof inspection and maintenance program typically include?
A structured program generally includes scheduled professional inspections, written condition reports with photographs, identification of areas needing repair, and guidance on maintenance intervals. Some contractors offer service agreements that combine inspection visits with routine maintenance tasks such as drain clearing and sealant refreshing, keeping the roof in maintained condition between major repair projects.

How does the Dallas climate affect how often a commercial roof should be inspected?
The combination of an active spring hail and storm season followed by an intense summer heat period means Dallas commercial roofs experience two distinct cycles of stress each year. Inspecting after spring storm season and again at the end of summer lets contractors catch weather-driven damage while it is still localized, reducing the risk that developing issues carry over into the next season unaddressed.

What documentation should I keep from commercial roof inspections?
Written reports, photographs, and repair records from each inspection visit should be retained for the life of the roofing system. This documentation supports warranty claims, informs long-term maintenance planning, and provides a condition baseline that is directly relevant if a storm event results in an insurance claim. Organized records also make it easier to hand off roof management responsibilities when property ownership or facility management changes.

The post Roof Inspection Dallas, TX first appeared on Anderson Industrial Roofing.

Why Timely Commercial Roofing Services Matter

Commercial roofing systems are designed to protect your investment, but even the best roofs experience wear and tear over time. Ignoring minor issues like leaks, damaged shingles, or deteriorated flashing can escalate into serious problems. Timely commercial roofing services address these concerns before they become emergencies.

Proactive maintenance and repair reduce the likelihood of leaks, structural damage, and compromised insulation. This is especially important for commercial properties in Irving, TX, where weather conditions such as heavy rain, hail, or strong winds can quickly worsen roof damage. Professional roofing services ensure your roof can withstand these challenges, preventing unexpected disruptions to your business operations.

Moreover, well-maintained roofs can extend the lifespan of your roofing system, providing long-term financial benefits. By investing in timely repairs and inspections, you minimize costly replacements and protect the overall value of your property.

Key Commercial Roofing Services That Prevent Disruptions

Roof Inspections and Preventive Maintenance

Regular roof inspections help identify potential issues before they impact your business. Experienced commercial roofing professionals assess areas like seams, flashing, membranes, and drainage systems to ensure everything is functioning correctly. Preventive maintenance services, including cleaning and minor repairs, further protect your roof from damage caused by debris, water pooling, and weathering.

Emergency Roof Repairs

Even with proper maintenance, unexpected roof damage can occur. From storm damage to structural wear, emergencies require immediate attention to prevent further damage. Commercial roofing services provide rapid response teams capable of performing temporary or permanent repairs. Quick interventions protect your property, reduce downtime, and ensure employee and tenant safety.

Roof Replacement and Upgrades

When a roof reaches the end of its lifespan, replacement becomes necessary. Modern commercial roofing materials, such as TPO, EPDM, or metal roofing, offer improved durability, energy efficiency, and resistance to environmental stressors. Professional roofing companies manage the replacement process efficiently, minimizing disruption to your operations and ensuring compliance with local building codes in Irving, TX.

Upgrading your roof can also enhance energy efficiency, lower maintenance costs, and improve indoor comfort for tenants and employees. A well-executed roof replacement is a strategic investment that contributes to the long-term stability and value of your property.

Minimizing Business Disruptions Through Planning

Effective commercial roofing services require careful planning and coordination. Experienced roofing contractors work closely with building managers to schedule inspections, repairs, or replacements during times that have minimal impact on daily operations. This approach ensures safety, productivity, and continuity for your business.

Additionally, professional roofing services include detailed project management. This involves obtaining necessary permits, coordinating with suppliers, and ensuring proper installation techniques. The goal is to complete the work on time, within budget, and with minimal interruption to tenants or business activities.

By partnering with a trusted commercial roofing provider, you gain access to expert guidance on roof maintenance schedules, material selection, and emergency preparedness. This proactive strategy reduces stress, prevents costly downtime, and keeps your commercial property in optimal condition year-round.

Professional Commercial Roofing Services

Commercial buildings are significant investments, and the roof is one of the most critical components. Timely commercial roofing services from professionals like Anderson Industrial Roofing safeguard your property from structural damage, water intrusion, and energy loss. In Irving, TX, addressing roofing issues promptly ensures that business operations remain uninterrupted and that your investment continues to appreciate in value. Call 866-949-8016 today to schedule a consultation and protect your commercial property with reliable roofing services.

FAQ

What types of commercial roofing services are available?
Services include inspections, preventive maintenance, emergency repairs, roof replacements, and upgrades to modern roofing systems.

How can commercial roofing services prevent business disruptions?
They identify and repair issues early, provide emergency response for damage, and plan work to minimize interruptions to daily operations.

Are commercial roofing upgrades energy-efficient?
Yes, modern materials like TPO, EPDM, and metal roofing improve insulation, reduce energy costs, and enhance building sustainability.

How long does a commercial roof replacement typically take?
The duration depends on roof size, material, and complexity, but professional contractors aim to complete projects efficiently with minimal operational disruption.

The post Commercial Roofing Services Irving, TX first appeared on Anderson Industrial Roofing.

Commercial Roofing Inspections: Identifying Storm Damage

Spring is the most active severe weather season across the DFW area, with hail events and high-wind storms capable of damaging roofing membranes that appear unaffected from ground level. Hail impacts can bruise or puncture a flat membrane without creating an immediate visible leak, allowing moisture to work its way beneath the surface over subsequent weeks or months. Scheduling a commercial roof inspection after any significant spring storm helps catch this type of concealed damage while repair costs are still manageable.

Summer brings a different category of stress. Surface temperatures on Dallas flat roofs can reach extreme levels during peak heat months, accelerating UV degradation of exposed membranes and placing repeated thermal expansion and contraction loads on seams, flashing details, and rooftop penetrations. By late summer, these components may show fatigue that only a close-up inspection can identify. Catching deterioration at this stage gives property managers time to address repairs before the next storm season begins.

What a Commercial Roofing Inspection Covers

A professional commercial roof inspection examines the full system rather than just the surface. Inspectors evaluate the membrane for blistering, punctures, and surface erosion, check seams for separation or lifting, assess flashing details at curbs, vents, and wall transitions, and evaluate drainage components including drains, scuppers, and interior gutters for blockages or deterioration. Each of these areas can become a point of failure if conditions are left unaddressed through a Dallas storm season.

Inspectors also evaluate penetrations such as HVAC equipment bases, pipe boots, and conduit entry points, where water intrusion is particularly common on flat roofs. The condition of field-applied sealants and termination bars is assessed, since these components are often among the first to show weather-related wear. A written report following the inspection documents findings with photographs and identifies which areas require immediate attention versus ongoing monitoring.

Using Inspections to Stay Ahead of Weather-Related Costs

One of the practical advantages of scheduling regular commercial roof inspections is the opportunity to address weather-related damage at its least expensive stage. A small seam separation or a developing flashing gap identified during a routine inspection costs significantly less to repair than the same issue discovered after water has reached the insulation or interior of the building. Dallas property managers who schedule inspections twice per year consistently keep per-incident repair costs lower than those who defer until a problem is visible.

Inspection records also serve a direct function when storm damage results in an insurance claim. Detailed documentation of a roof’s condition before and after a weather event establishes a clear baseline and demonstrates that the property was being actively maintained. This documentation is particularly relevant in hail-prone markets like Dallas, where distinguishing pre-existing membrane wear from storm-caused damage is frequently a point of dispute during the claims process.

Commercial Roofing Inspections in Dallas, TX

Dallas weather does not allow much margin for deferred roof care. The combination of spring storm exposure and summer heat creates conditions that require regular professional evaluation to manage effectively. For commercial roof inspections in Dallas, TX contact Anderson Industrial Roofing at (866) 949-8016 today.

FAQ

How often should a commercial roof be inspected in Dallas, TX?
Twice per year is the standard recommendation for most flat commercial roofing systems, with additional inspections following any significant storm event. Dallas’s active spring hail season and high-heat summers each create conditions that can affect roof performance in distinct ways, making post-season evaluations a practical part of a maintenance program.

What does a commercial roof inspector look for after a hailstorm in Dallas?
Inspectors look for membrane bruising and impact punctures, cracked or displaced flashing sealants, and damaged drainage components. Hail damage to flat membranes is often not visible from ground level and does not always produce an immediate interior leak, which makes a professional post-storm inspection the most reliable way to assess the actual condition of the roof and document any damage for insurance purposes.

Can a commercial roof inspection report help with an insurance claim?
Yes. A documented inspection report that includes photographs and a written assessment of roof conditions prior to a storm provides a baseline that helps distinguish pre-existing wear from new storm-caused damage. This type of record is frequently relevant in Dallas-area hail claims and can help support the claims process by demonstrating that the roof was in documented condition before the weather event occurred.

The post Commercial Roofing Inspections Dallas, TX first appeared on Anderson Industrial Roofing.

Here are a few tasks you may want to complete before the first spring storm rolls through.

Inspect the Gutters Around Your Roof

One of the first pieces of roofing advice given to the average homeowner is to keep the gutters clear of debris and old leaves. It’s a task that’s commonly done in the fall, but inspecting the gutters in the spring is important, too.

With the increases and decreases in temperatures in the fall, winter, and spring, it’s possible that the gutters around your home have loosened or become a little unsteady. It’s a good idea to check the sturdiness of your gutters to make sure their attachment points will remain secure in a storm.

Take a Look at the Flashing on Your Roof

Around your home’s chimney and its vents are metal pieces called flashing that help seal your roof. Flashing is designed to keep water from entering your home, and a storm can damage the flashing on your roof, as well as result in flooding if the flashing isn’t secure.

The National Roofing Contractors Association describes flashing as:

“Components used to weatherproof or seal roof system edges at perimeters, penetrations, walls, expansion joints, valleys, drains and other places where the roof covering is interrupted or terminated.”

You may want to have a roofing contractor inspect your flashing since examining it closely may require a trip onto the top of your roof. Not only will keeping your flashing in good condition prevent water from getting into your house, but securing it will also keep it from damaging your home in the event of a storm with high winds.

Cut Back Unruly Trees and Brush

You’ve probably seen crazy pictures of spring storm damage with substantial tree limbs falling onto houses and cars. A strong storm can prove deadly if you have trees or other brush around your home that isn’t secure or that might bend and crack in high winds.

A visual inspection helps figure out whether you need to take off any significant branches, or whether your hedges and smaller plants just need a quick trim.

Hint: Keeping ahead of your gardening duties can help you avoid problems with unexpected breakage and damage due to high winds and spring storms.

Tie Down Exterior Decor & Furniture

You may leave your patio furniture and other movable items out all winter, or you might store them in a shed or the garage. It’s usually a good idea to put those items under a roof during the winter to keep them in good shape while you’re not using them.
However, you may also want to consider securing your outdoor decor and pieces of furniture, so wild winds can’t blow away and damage your home, its windows, or the roof. Just weighing down your furniture can help; securing it to the deck with nails isn’t always necessary.

Protect Your Home this Spring with Anderson Industrial Roofing

Now that you know how to keep your home’s roof safe in the spring, maybe it’s time to work with a roofing company with more than two decades of roofing industry experience. Contact us for a spring inspection and for information on how we can improve your home’s roof.

The post Preparing Your Roof For Spring Storm Damage first appeared on Anderson Industrial Roofing.

Aside from checking a license and making sure they have an excellent portfolio, there are other steps that you can take to ensure that you don’t fall into the trap with one of these 3 common roofing scams.

The Door-to-Door Salesman

From senior citizens to people who may just seem desperate for a new roof after an accident, some door-to-door salesmen pose a real threat to the credibility of a roofing job. What makes these scammers so dangerous is that they approach their victims with the offer of a free roof inspection.

Once this offer is taken, the “inspector” will make their way to the roof and create their own damage that will justify immediate repairs. Another thing to look out for is potential photographs of already damaged roofs they may show, insisting that it is your own.

Keep in mind that most honest roofing companies do, in fact, practice door-to-door sales. All you need to do to keep your finances safe is to ensure the legitimacy of the company and not to sign any contracts until your home insurance agent comes out to inspect the roof on their own.

Your Roofing Deposit Disappears

If you see flashy advertisements for a “new” roofing company in the area that doesn’t seem familiar. Be wary before hiring them. While some businesses may, in fact, be legitimate sources of repair, some newer businesses can be the culprits of the popular deposit scam.

Most companies will require a deposit for roofing repairs that usually land around 30 percent of what the job would cost. The scammers in these situations will ask for “parts and labor cost” up front as an entire down payment, then disappear once the money goes through.

To prevent falling for this scam, never pay a dime for a job until the project supplies have been delivered and you have a legitimate, estimated date of completion.

Taking a Ride on the “Elevator”

The “Elevator Ride” is a scheme that revolves around fluctuating bids. These jobs usually start out great with the promise of a bid, far beneath that of any local competitors. At this point, you should be wary, because you may start to find “hidden costs” or “unexpected problems” with the job. In the end, the job would cost you more than it would have, had you gone with a trusted roofing company that offers all bids up-front.

Contract with Anderson Industrial Roofing for an Efficient and Insured Job Well-Done

Your roof repair is a process that should be handled with care by a trusted professional. The next time you need a roof inspection or replacement, let Anderson Industrial Roofing lend our expertise. We specialize in repairing and replacing both commercial and residential roofs. Contact us today to find out more about the services we offer in your area.

The post Avoiding These 3 Common Roofing Scams first appeared on Anderson Industrial Roofing.

1. Prepare Your Roof For Winter
2. Have An Attic Inspection Done
3. Trim Down Surrounding Trees
4. Clear Our Your Gutters
5. Keep Your Rooftop Traffic To A Minimum

Take the advice of real Dallas roofing contractors and try out these tips to make sure your building isn’t damaged when the weather cools down.

1. Prepare Your Roof for Winter

When it comes to your roof, being proactive is much better than reacting when an expensive problem occurs. For both residential and commercial roofs, it is highly recommended to have your roof inspected. This exterior inspection will point out issues like:

• Leaks
• Loose Shingles
• Cracks
• Physical Holes in the Roof

It’s important to take these steps while fall is still in effect. Once the snow and ice begin to form, it will become nearly impossible to detect the smaller problems that can easily grow into disasters.

2. Have an Attic Inspection Performed

Not only is the exterior of your roof important to check, but you will also want your inspector to examine your attic. A quick look at your attic will be able to tell an owner if there are water stains, leaks, or even roof damaging rodents residing in the building. Taking care of these issues while the weather is still tolerable is important.

3. Trim Down Trees Surrounding Your Roof

Your structure’s surrounding shrubbery may be a beautiful mix of colors now, but come winter, those trees become a roof hazard. One strong storm can send a nearby tree or low hanging branch through your roof and cause a world of roofing problems. Get in touch with your local roofing specialist to find out how far back you need to cut your trees in order to keep your roof safe during a storm.

4. Clear Out Your Gutters

Fall will bring about the accumulation of leaves in your gutters. Even though initially they are light when they fall on your rooftop, once the rains begin to come, this natural debris becomes ever the heavier.

By keeping your gutters clear now, not only can you avoid unnecessary stress to your roof, but you can prevent them from overflowing and building up pools of water underneath your shingles during cooler weather conditions.

5. Keep Your Rooftop Traffic to a Minimum

With the holidays approaching, it will be tempting to get on top of the roof and place your holiday lights. While you can enjoy this time, please be mindful of how often and how long you are traversing on your roof. Excessive climbing can eventually damage your shingles and ruin the flashing of your roof.

Anderson Industrial Roofing Gets Your Rooftop Winter-Ready

Having your roof inspected before any drastic change in the weather is important. If you know that your residential or commercial roof is overdue for an inspection, don’t wait until the temperature drops to freezing. Get in touch with Anderson Industrial Roofing today to schedule a roof inspection to ensure that your valuables are protected from the elements.

The post 5 Fall Roofing Best Practices first appeared on Anderson Industrial Roofing.

Thus, the frequent cleaning of your roof actually does make sense since it is not just for aesthetic purposes. Following that, the issue is not just the dust, it is the fungi and mold that is healthy enough to significantly damage the shingles installed on your roof. While in majority of the cases, the dark stains are the result of resilient algae, at other times, the situation is faced because of the inhabitation of mold or fungi on a roof’s deck.

Failing to understand the difference between algae and roof mold and performing the cleaning as a DIY task will only end up in making it worse. Instead, hire a professional roofer in Irving, TX to get effective results.

Talking about commercial roofing in Irving, TX, many people usually confuse the presence of mold or fungi with algae. Generally, the black stains are capable of harboring a number of molds. Similarly, unlike algae, fungi present on our roofs do not have chlorophyll. This makes them incapable of manufacturing food on their own from the raw material and they must acquire the nutrition from organic matter.

Also, they require an adequate warm and humid environment to survive. Hence, a roof that is severely exposed to different temperatures and is neglected when cleaning is the perfect place for the mold; to not only survive, but also to reside peacefully. 

Is it algae or roof mold?

While algae may look green in color on a pond, it might appear black or very dark green on a roof’s surface. Since the roof algae resembles a mold so much, it is sometimes also referred to as toxic mold or a black mold by commercial roofers in Irving, TX.

While a commercial roofer in Irving, TX will give a professional insight about the growing mold or algae on your roof, you would still find it difficult to be sure of it unless the roofers in Irving, TX test the roof for either of them.

In view of this fact, it is easy to remove the roof mold or algae with the use of some readily available chemicals in the market. However, sometimes, it becomes very hard to clean the roof of mold or algae without seeking the services of a professional commercial roofer in

Irving, TX. Some materials like wood need special techniques, depending upon the roof type and extent of the grown mold.
For the very same reason, it is essential that you get your roof tested by hiring a commercial roofer in Irving, TX so that you don’t end up dealing with algae as roof mold and vice versa. 

Does the unsightly roof mold destroy the roof shingles?

Undoubtedly yes! While the roof mold may be unsightly, in more harsh cases, it begins to destroy the shingles almost immediately. Where some algae and other fungal growth may only cause shingle discoloration, in other cases, the extent of damage may increase significantly. Certain airborne fungi or algae may also grow on roof shingles, leaving behind black or dark green ugly stains of a roof mold.

With that, the roof mold is also likely to hold moisture against the roof shingles that simply accelerates the damage significantly. Furthermore, in the case that we don’t pay timely attention to the growing issue, this will ultimately result in shortening of the life of our roof shingles. 

How can we prevent the damage caused by the roof mold or fungi?

Although we cannot control the starting of a mold growth, we can prevent the damage that it causes to our commercial building’s roof. This can be done by proactively taking some measures that are not only tested but also advised by the commercial roofers in Irving, TX to help-prevent the growing roof mold.

Measure #1

It is important to ensure that the rain gutters effectively direct the water away from the roof. Moreover, keeping the gutters clean and free of any kind of debris is also an important measure to take. A clogged rain gutter will make the water stay on a roof’s surface, hence, increasing the moisture and damage to its surface. It is suggested to use the leaf blower to get rid of the excess debris as soon as it starts accumulating on the roof’s surface. 

Measure #2

Another important measure to take is the timely and prompt repair and maintenance of a roof to avoid inviting more damage and uncertain growth of fungi. An already damaged roof is likely to be more prone to mold and fungi infection than a roof that receives timely attention of a commercial roofer in Irving, TX.  

Measure #3

Always keep the trees around the building trimmed. This will allow direct sunlight to fall on the roof’s surface which will decrease the excess moisture on a roof. Also, this will help in keeping the falling leaves and branches/debris away from the roof deck. 

What should be done now?

In the case that you did take the preventive measures but somehow have mold growing and destroying your building’s roof, then you must get your roof cleaned immediately. Remember that using the wrong mold removal product or equipment (or without seeking the expertise of a professional), you might not only be left with the mold remaining on the roof’s surface but also the cost of a roof’s replacement.

Therefore, if you are currently looking for mold removal from your building’s roof surface, we recommend hiring a professional commercial roofer in Irving, TX. The qualified professionals like Anderson Industrial Roofing not only know how to safely remove the mold but their expert team is also well-versed in improving the appearance of any roof type and the longevity of your building’s roof.

The post Are You Confusing Roof Mold with Algae in Irving, TX? first appeared on Anderson Industrial Roofing.

Sizzling Texas summers can wreak havoc on roofs of all kinds. If left untreated, small issues can quickly develop into huge, costly repair needs, or even the need for an expensive re-roofing project. Extend the lifespan of your roof by enlisting the help of a professional roof inspector.

Value of Roof Inspection

Regular roof inspections can quickly pay for themselves. Industry studies have shown that roofs that aren’t properly maintained last as little as one-third of their total life expectancy. You can dramatically extend the life of your roof by scheduling routine inspections and timely maintenance. Compared to the cost of a new roof, these measures are truly a bargain!

Other benefits of scheduling regular roof inspections include:

• Documentation of your roof’s condition
• Stabilized general liability insurance costs
• Early notice of potential condition issues
• Assists in maximizing return on investment
• Help with minimizing repair expenses

Need Inspection Services?

(866) 949-8016

Commercial Roof Inspection Experts

Since you don’t see your roof every day, it can often be out of sight and out of mind. Make things simpler with a regular roof inspection and maintenance plan from Anderson Industrial Roofing. We have 30+ Year of industry experience with a full spectrum of roofing types. Our skilled technicians will locate potential issues, and our dedicated roofing craftsmen will address them in a timely manner.

We have decades of experience in commercial and industrial roofing. Let us put that experience to work for you! Timely roof inspections are the key to getting the most out of your investment in a roof. Give us a call to address all of your inspection needs.

Texas Roof Inspection

If you’re in need of a roof inspection in or around Irving, Texas, contact Anderson Industrial Roofing. We’ll be happy to help you address any questions or concerns you may have. Whether you need an inspection to locate a specific issue or you’re interested in an ongoing roof service program, you can count on us.

Let us extend the lifespan of your roof!

The post Roof Inspection in Irving, Texas first appeared on Anderson Industrial Roofing.