Articles | Anderson Industrial Roofing

Why is Polyurethane Foam Roofing in Dallas, TX So Popular?

April 10, 2017

Polyurethane Foam Roofing in Dallas, TX has been around since the 60s and 70s when it hit the mainstream roofing market. Unfortunately, many have associated numerous myths with the Polyurethane Foam Roofing in Dallas, TX so much so that most roofers in Dallas, TX do not even think it as remotely funny. The most probable reason is that most people have come across different kinds of foams, which may cause considerable confusion.

The Polyurethane Foam Association has estimates that around 2 Billion pounds of flexible polyurethane foam products are being manufactured in the United States alone. The baseline for all these products is that they are modified plastics filled with micro bubbles to put it in simplistic terms. Here are 10 reasons why Polyurethane Foam Roofing in Dallas, TX is so popular.

1. It has been around for years

Ever since groundwork on it began in the late 30s by German Industrial Chemist Otto Bayer and his talented team, there has only been improvement. First, in the early 50s there were the polyisocyanates, and in 1954 flexible polyurethane was made commercial. Interestingly, when they first came out, the team of inventors called it imitation Swiss cheese because of the way it looked. The final product for the roofing market that we know today came to be almost half a century ago and the houses that have Polyurethane Foam Roofing in Dallas, TX may have been around since the early 90s.

2. The Birds Enjoy it

The Polyurethane foam roofing in Dallas, TX that has visibly reached the peak of its life is invariably going to attract birds. They will peck away at the rotten patches of the roof, and make a bad situation worse. Fortunately, those incessant birds can be stopped, by a fresh coat or acrylic caulking to the damaged area. But beware! There might be things such as moisture that may have seeped through which can cause problems later on. Don’t forget to contact your trusted roofers in Dallas, TX.

3. It is Relatively Inexpensive

The cost of polyurethane roofing is easily at par, if not lesser in cost than your average BUR or single ply. It’s got the added edge of a high R value at essentially the same price if not lesser. Oil price fluctuations cause the price of BUR, EPDM and TDO, etc., to rise; whereas, the prices of Polyurethane Foam Roofing in Dallas, TX to remain stable. This is because there are cheaper renewable sources that are being used as the primary material used for the roofing in Dallas, TX.

4. Timely installation and replacement set you up for life

Once you have bought the foam, you have been set up with a roof for life. Given that the installation was done by professional and certified roofers in Dallas TX. Other roofs would require tremendous amounts of labor and other costs if the time came for replacement. But all it takes is a nice, even spray to get the roof looking brand new. Get professionals to come and repair the roof as soon as you spot signs of wear. Often times when the damage occurs, it is too late when the cavalry is called and it becomes next to impossible to correct the damage without incurring extra costs. Moisture, dust and other particulates may creep inside the damaged roof and affect its integrity.

5. It works better than Foam Boards

Foam boards are basically sheets of the same material (Polyurethane) spread and rolled across the roof to fit like pieces of a jigsaw puzzle. Moisture may still make its way in through the seams between the boards, making that moisture a danger to the integrity of the roof. Torrential summer downpours in Irving, TX may make this a possibility for existing homes with foam board roofs. On the other hand, the Polyurethane Foam Roofing in Dallas, TX allow for better and seamless integration with your existing roof. Roofers get all of the rubble, gravel and debris out of the way before they get started to make sure they get you that promised seamless integration with your existing roof.

6. You can walk on it

Contrary to popular belief, you can walk on Polyurethane foam roofing in Dallas, TX without having the stealth of a Navy SEAL operative. The initial curing time of 24-48 hours is when the foam is settling and it is inadvisable to go near it. After that, it is inert and completely safe to walk on. The foam itself at the time of spraying is toxic, so you have to be careful at the time it is being installed. If you have a business, make sure that your employees are not allowed on the rooftop area. Otherwise, you may have a lawsuit on your hands, so beware. Also avoid overdoing the walking too much. The commercial flat roofs are notorious for causing dust and natural debris from trees to go into you or your employee’s eyes and cause blindness.

7. It saves on Energy

We saved the best for last. The energy saving that you get on your HVAC bill if the roof installation is done immaculately, will put a huge smile across your face and a big increment of profits in your business. This is because a polyurethane foam coating provides some of the best insulation ever witnessed. That means cold air from the AC stays in during the summers and the heat stays in during the winters so you don’t have to worry about having high energy bills (given of course that your HVAC equipment is up to date and well maintained).

Get your friendly professional roofers in Dallas, TX at Anderson Industrial Roofing to evaluate and inspect your roof so they can recommend you the best roof for your needs.

Why a Commercial Roof Repair Will Help You Negotiate Property Price

April 7, 2017

Unshading-the-Shaded-How-Trees-Can-Damage-Your-Roofing-System-in-Dallas-TX

Commercial property is one of the most prudent investments, which pays high dividends in the long run. Over the passage of time, people can start working for improving their commercial property so that at the end of the day, they are able to sell the property off at a higher price. While there are a wide variety of things that people can look at when you sit down to sell your property. However, the quality of the roof in your building is also important as far as your seller is concerned. Hence when you sit down to sell or buy your roof, you need to make sure that you are able to go for a proper commercial roof inspection.

Before you go ahead with buying a property, you need to make sure that you hire a Dallas-Fort Worth commercial roofing contractor to get the roof of the property inspected. Not many people understand the importance of hiring an experienced contractor to inspect your commercial roof before the price for the purchase of the property can be determined. This article takes a look at those aspects and outlines how a thorough inspection of a commercial roof can help you negotiate the price of a commercial building.

Here is a look at some of the questions that you can ask in your commercial roof repair.

How Much Will It Cost to Maintain the Roof in the Future?

When you hire your roofing contractors, you should make sure that you ask them with what the commercial roof would cost you in the long run. At the end of the day, your inspector should give you a detailed plan of how the roof has been damaged, how much the roof needs to be changed and what are the aspects that need a repair. Once that has been determined, they can give you a low down of the costs that will be needed for the repair as well as the lifespan of the roof after the repairs have been concluded.

How Can the Roof’s State Affect Building Performance?

Why would a commercial roof be important if it does not affect the overall performance of the building? This is why when you hire a roofing contractor in DFW, you need to make sure that you ask them the importance of the roof for the building. If the roof does not affect the performance of the building, at the end of the day it can be hard for you to buy a building that has a roof which hampers its performance. Make sure that your negotiations are properly centered on the importance of the roof and it dictates the report of the roof inspector.

Can the Property Be Re-Roofed and at What Cost?

A building cannot function properly without its roof. If the roof of the building is faulty, it can be difficult for the building to retain its value and quality. The first question to ask your roofing contractor is whether the faulty roof can be changed. If the roof can be changed, what will it cost to change the roof? What is the point of buying a property that needs to have hundreds and thousands spent on the roof after the building has been bought? The cost that they give you will need to be measured against the cost you are paying for the building. This is why it is important to get a proper inspection.

Are There Any Things That Need to Be Looked at Which Might Create Problems in the Future?

When you buy a building, there are a wide variety of different things that you look at. A contractor knows what needs to be looked at and if the roof can be changed over time and whether or not it is feasible with the plans you have for the future. Plans for the future are important if you are buying a property, because finding out at a later date that your roof constraints your expansion schemes can dramatically impact your plans. For this reason, you should explain your plans to your contractor, so they can keep them in mind during their inspection.

Make Sure Your Bargain Is Driven Hard

When you are buying commercial property the most important thing is to make sure that it works well with your future plans. There is no point in buying property that comes with an excessive need for repair.

When you sit down with a person who owns the commercial property, you need to tell them what they are looking for. Buying property needs to be shared with the quality of the commercial roof on offer. The cost of the property should discount the costs that will need to be repaired.

Anderson Industrial Roofing is a company that offers not just the right kind of services; they are able to offer high-quality roof installation, proper roofing repair and proper services on the back of affordable rates.

If you wish to have your roofing replaced or repaired by a team of professional commercial roofing, contact Anderson Industrial Roofing to get the best quality at your doorstep.

Energy Efficient Roofing in Irving, TX—A return on your HVAC investment

April 6, 2017

flat-and-low-slope-roof-types-for-commercial-buildings-in-dallas

As commercial roofing in Irving, TX is a must have for every commercial business owner, commercial roofers are constantly adopting new roofing methods and better materials to provide a long lasting protection to roofs. When it comes to choices, people usually go for a variety of options available in the market in terms of material, color, style, and design.

However, not many people consider the other long term factors which are equally associated with commercial roofing in Irving, TX nowadays. So if the chosen commercial roofing in Irving, TX is energy efficient, what value does it hold for your business?

What do we mean by Energy Efficient Roofing?

Energy Efficient Roofing (or a cool roof) is a classification of roofing based on the material used in commercial roofing in Irving, TX. This type saves energy, keeping the roof and the building much cooler during the hot seasons. If a commercial building is located in a warm climate with environmental deteriorations like pollution, industrial waste or drainage, this type of commercial roofing in Irving, TX is the next move for a business’s roofing needs.

Moreover, with this method, a business can effectively cut down its cooling cost on an yearly basis. Plus, it is also good for the environment we live in. The great news is that improving the energy efficiency of your roof does not have to be costly. Small changes can create a big difference in the way commercial roofing in Irving, TX is experienced.

What makes commercial roofing in Irving, TX an energy efficient project?

To understand the concept of energy efficiency associated with commercial roofing, we first need to accept the fact that every aspect of commercial roofing in Irving, TX (whether it’s the material or even the color of your roof) makes a difference to the amount of heat being observed by the roof itself.

Just by going to the roof on a sunny day and by touching the roof’s surface, it will become evident that the more exposure the roof’s surface gets to the sun’s heat, the hotter it will become. The same effect becomes evident when your roof is of a darker color.

Keeping this in mind, cool roofing takes advantage of specific technologies and material properties to offer an energy efficient roofing option.

Energy efficient roofing materials use two basic properties that are Reflection and Emittance. The better the reflection and emittance properties of a roofing material, the more cooling effect it offers. Performance standards for energy efficient commercial roofing in Irving, TX are generally based on the performance after 3 years of service. This is due to the fact that a roof’s solar reflection property can change over time due to accumulation of dirt and normal wear and tear over time.

Below, we have discussed some of the major pros and cons that come with the installation of energy efficient roofing:

The Pros and Cons of Energy Efficient Roofing

Here are some of the benefits and drawbacks of choosing energy efficient roofing for your commercial needs.

Pro—Saving on Cooling Costs: It is evident that during warm sunny days, the roof of a building is the basic source of heat absorption which is further transmitted into the building. The more the building absorbs heat, the more you will have to run your air conditioning. Therefore, energy efficient roofing is the ultimate solution to reducing your cooling costs as it significantly lowers the roof’s heat absorption capacity and is an energy efficient solution.
Pro—Durability and Extended Roof Life: The excessive heat absorption by exposed roof surfaces can cause severe degradation of the roof and reduce its durability. For a sustainable and long lasting roof surface, it is necessary that it should be heat resistant. Therefore, energy efficient material holds the reflection properties to minimize the heat absorption. This is useful considering the fact that if you don’t use air conditioning; a natural cooling effect into a commercial building set up is more comfortable to operate in.
Con—Lighter Roof Colors Get Dirtier Easily: Energy efficient products are mainly based on using lighter colors to reduce heat absorption. However, products like light gray asphalt shingles give a dirtier look more frequently if they develop algae, leading to recurrent cleaning requirements. However, for a roofing project to be energy efficient, it is necessary that it should reduce heat retention in the building and lighter roof colors are one of the basic changes you can make in this regard.
Con—Heat reduction in winters due to cooler roofing: During the winters, the heat absorption of a normal roof is beneficial to maintain the temperature of the building. However, in case you have opted for energy efficient roofing, then during the warmer season, you might need to increase the heating temperature. Since the roofing style cannot be changed frequently or from season to season, therefore this is one of the cons of energy efficient roofing. However, in most cases, the additional cost of heating needed during winters is majorly offset by the cooling costs saved due to energy efficient commercial roofing in Irving, TX.

Are you looking for an expert for commercial roofing in Irving, TX to provide you with the leading energy efficient roofing solution? Regardless of how much time you invest in planning for your new roof or cost saving ideas, it is necessary that this task is done by a team of experts who are specialized in this field. This will ensure that you get the desired results with long lasting effects to avoid frequent repairs and maintenance.

Anderson Industrial Roofing is available as your first choice of commercial roofers in Irving, TX. It’s time to give your roof the best treatment by hiring high end commercial and industrial roofing services in Irving, TX.

Everything You Should Know About Foam Roofing in Dallas, TX

April 5, 2017

An excellent quality roof is vital to any building or structure. In an era where foam roofs are quickly becoming the norm for buildings and structures due to the large variety of benefits, it’s no surprise that more and more people are considering trading their normal roofing systems to get the more popular commercial foam roofing installed in their buildings.

Foam Roofing rose in popularity in just the past few decades when roofing contractors and other roofers in Dallas, TX discovered the numerous benefits of spray foam roofs. Accordingly, there are a lot of different types of foam roofs available today, such as spray polyurethane foam, Styrofoam, polystyrene foam, polyethylene foam.

Spray foaming is well known for its many outstanding qualities, such as high thermal resistance, high protection and shielding, the ability to keep out water vapor, pollen, dust, air, and other pollutants of the kind. This obviously makes it a top choice for roofing contractors and consumers alike when it comes to roofing in Dallas, TX.

Among the many types of foam roofs that you can install in your buildings and structures, the most proficient and most popular choice is Polyurethane Foam Roofing in Dallas, TX, due to its numerous benefits. Spray Polyurethane Foam is the only roofing material that provides a seamless finish which is one of the major reasons why it’s extremely popular.

Understanding Polyurethane Foam Roofing in Dallas, TX

Spray Polyurethane Foam Roofing in Dallas, TX is a type of plastic that transforms from liquid form to solid within seconds. As it solidifies, the volume increases to approximately thirty times more. This is the most sustainable type of roofing known in today’s time and surprisingly, it is very cost effective too.

Many people believe that foam roofing is a recent invention, although that is completely false. Foam roofing has been around since 1937 when Dr. Otto Bayer started incorporating polyurethanes in his work. Although the mass production of polyurethane began later on in the early 1950s, it is still a product that has been in existence for at least half a century.

Some other qualities of SPF roofs, or Spray Polyurethane Foam Roofing in Dallas, TX, are that it is very easy to install, is waterproof, and protects your roof from the harsh sunrays too. Yet, not a lot of people understand what spray Polyurethane Foam Roofing in Dallas TX truly is. There are a lot of myths that encircle the unique but outstanding roofing system.

Here are just a few of them:

1. “Polyurethane Foams Are Impossible to Walk On”

This myth is so far from the truth that most roofers in Dallas TX would not even find it funny. Walking on foam roofs is possible and does not require you to have an extraordinary set of balancing skills to do so. Foam roofs definitely have the capabilities of normal roofs and you can easily walk on them as long as you’re not wearing any stilettos or boots with spikes that might damage the foam.

2. “Polyurethane Foam Is Lethal or Toxic”

This is definitely a myth. Polyurethane Foam is made from a combination of isocyanate and polyol. In simpler words, it is just a type of altered plastic with a lot of small air bubbles trapped on the inside, which means that it is completely safe and in no way is it lethal or toxic.

The base material of polyurethane foam is the same as the material used in mattresses and refrigerators, but that is not to say that it is not fit for roofing in Dallas TX. Polyurethane foam is designed in a different way to provide the best mixture of durability and thermal resistance.

3. “Polyurethane Foam is Expensive”

Foam roofing in Dallas TX costs almost the same, if not more, as a traditional roofing system. Foam roofing has also maintained a constant pricing scale over the years, as compared to other BUR or Asphalt roofs that face an increase in prices when the prices of oils increase.

Due to the simple elements that are used to create the material, the price of the polyurethane foam will not give you a run for your money. This is also one of the reasons why it is so popular among roofers in Dallas TX as well as economically conscious people. Another factor that makes the SPF roofing system a lot more cost effective is the fact that you wouldn’t need to get it changed for at least the next 25 years.

4. “Absorption of Water is Common with Polyurethane Foam Roofing”

If this was true, nobody would use polyurethane foam roofing in fear of the havoc it would cause if it was rainy season. The material that foam roofs are made out of ensures that it does not absorb any water while maintaining its form. If you were to submerge a block of Spray Polyurethane Foaming in Dallas TX in water, it would not absorb a single drop, remaining dry and buoyant.

This is why SPF is used even in flotation docks. However, if the foam on your roof does absorb water, it is definitely a fault in the way that it has been prepared. This means that either the components of the material or the material itself is incorrect, or has not been prepared by professional roofers in Dallas, TX.

5. “Birds Peck On the Foam and Destroy the Polyurethane Foam Roof”

This is only possible if you have not maintained your roofing to the point that the acrylic coating is starting to wear off. Birds may begin pecking on your roof if the foam on the roof is seriously deteriorating. But even then, it is possible to stop them from doing so by renewing the acrylic coating on the roof.

However, if the condition of your foam roofing is relatively new, or not that bad, then there truly is no chance that birds would come to peck on the Polyurethane Foam Roof in hopes of destroying it. This is because the extra layer of coating that foam roofs are sealed with are so tough that a bird’s beak would bounce off the surface if it did try to peck it.

These are just the top 5 myths that we uncovered, but you must have an idea by now of the value of getting Polyurethane Foam Roofing in Dallas, TX. If you want to get SPF installed on your roof by a team of professionals, contact Anderson Industrial Roofing.

Mistakes to Avoid with Commercial Roofing in Dallas, TX

April 4, 2017

Commercial Roofing in Dallas, TX is something that every business needs but not everyone knows much about. Do you know that flat roofing projects are very different from those for sloped roofs? Not just are the materials different, but also, the methodology of installation differs widely.

Every business owner’s location should put forth a good image to the public and their clients. Therefore, commercial roofing in Dallas, TX is now the ideal solution for long lasting and a strong roof structure!

If you are in charge of the repair or maintenance of a commercial building, there are a few things you must know before you plan the next project for commercial roofing in Dallas, TX. Simply by reading out these major mistakes that are commonly observed in all commercial roofing projects carried out nowadays, you can make the repair, replacement and inspection of commercial roofing in Dallas, TX more reliable and durable.

Read ahead, to avoid some serious mistakes made with most projects for commercial roofing in Dallas, TX.

Improper Drainage Is a Serious Issue

The most common factor to consider is that unlike your residential roofing, most commercial buildings have a flat roof. These roofs do not have a natural angle that will help proper drainage of water from the peak to the edges, therefore, causing damage to the roofing material. A wide variety of techniques are now being used in commercial roofing in Dallas, TX to ensure proper drainage for flat roofing, so it’s important that you ask the roofer to accomplish this and that an inspection is done after any installation to ensure that it is carried out properly.

Adding Too Many Layers

Have you been told to install a new roof over an existing roof? Does it sound like a routine procedure to you? Well, there are many commercial roofers who are always willing to place a new layer over an old and damaged layer to avoid disposing it off. Too often, commercial building owners try to put new roof over more than two or three old roof systems.

It is very necessary to make sure that there are no more than two roof systems at a time. This is because eventually, the weight of all these system will become too much for your building to bear, and the roof will collapse. So keep the weight as low as possible to avoid any uncertain situations.

Inaccurately Securing Protrusions

A commercial building’s roof is mostly fitted with cooling and heating appliances as well as pipes for a variety of systems inside the building. Whenever these items protrude from the roofing of a commercial facility, it’s important to have proper flashing to secure them, as this becomes the main reason of mold, mildew and other damages as water seeps in through the edges of appliances, easily and quickly.

Roofing Scams

What gives a scammer an upper hand in taking advantage of you? Unfortunately, your lack of knowledge, plus the fact, that your roof is one of the most important aspects of your commercial building.

Did a storm just hit? Is a roofer asking you for a down payment for roofing supplies? Is there a knock on your door from a salesperson telling you that you have a damaged roof? Don’t get manipulated by these scammers!

A legitimate service provider of commercial roofing in Dallas, TX will give you exact time and contact information to reach out to them rather than chasing you and taking advantage of uncertain conditions which leave you bewildered and force you to make the wrong decision.

Pay Only After the Work Is Done

The most common mistake done by owners is making complete payments before the work is actually done. The only reason a reputable roofing company would ask for payment upfront is, if you request special materials that are out of the scope of normal projects for commercial roofing in Dallas, TX. If you like to make payments, then always pay as the roofing job is being completed. This is necessary to ensure that your work is done in time and effectively, rather than being delayed or getting neglected by roofers unnecessarily.

Avoiding Repairs

The importance of commercial roofing in Dallas, TX is not negotiable. Similarly, the material used to make commercial roofs is mostly metal and steel, while normal roofs are made out of bricks. It’s therefore necessary that if you notice a leak or another problem with your commercial roofing in Dallas, TX, you need to have them addressed straightaway.

One of the most common mistakes is to delay or avoid the small repairs as this leads to bigger and more costly problems in the future. This can also be the source of some serious damage to the building and might require a complete roof replacement.

Conduct a Final Inspection

Most of the times, when roofing repairs are taken up by business owners, they are left uninspected. And that is not a problem as long as work is done by a professional service provider. However, in case you are not confident in your own ability to tell the difference between a professional or amateurish job, it is crucial that a third party inspection is carried out, such as one given by a representative of a local roofing organization.

Commercial roofing in Dallas, TX is being offered by a variety of service providers. However, it has always been a tough job to hire a reliable contractor who will do the job right and be ready to stand by their work even years down the road. So protect yourself from scammers and unprofessional service providers as roof management is a major expense for any business.

Are you going to undertake any project for commercial roofing in Dallas, TX? Before you begin preparing for your next roof maintenance activity, take the time to explore the professional portfolio of Anderson Industrial Roofing, whose 30+ Year of roofing services in Dallas, TX is a reflection of expertise and its highly professional team. It’s the ultimate solution to your roof’s installation, repair, restoration and replacement needs.

Why Is It Necessary to Hire a Professional Roofer in Fort Worth, TX?

April 3, 2017

signs-that-you-have-hired-the-wrong-dallas-tx-roofing-contractor

Regardless of how much you try to put it off, every once in a while, everyone has to install new roofing or repair their existing one. At times like this, it is always best to seek the help of a professional to get the job done.

There are plenty of complications involved in installing new roofing in Fort Worth, TX or in making repairs to an old roof. From the materials being used to the sizing, there are a number of things which need to be taken into account with roofing. Most people, however, are unaware of even the basics.

Unfortunately, many people still opt for installing their roofing by themselves in an attempt to save money. The lack of knowledge and expertise can prove to be extremely dangerous in the long run since the installation will not only be extremely inefficient, but it is also very likely that there were mistakes involved in the installation process for roofing in Fort Worth, TX.

The costs incurred, too, also end up increasing when you attempt to install your roofing by yourself instead of hiring professional roofers in Fort Worth, TX. Not only will you have to get the roof installed from scratch by a professional later on, but you also need someone to fix the mistakes which you have made.

Read on to find out a few reasons why it is best to hire a professional roofer in Fort Worth, TX.

Costs

The cost of the materials involved in the installation of new roofing in Fort Worth, TX will remain the same whether you hire a professional for the job, or attempt to do the task by yourself without any external help.

There is however, always a possibility that errors of varying severities are made in the installation or repair of roofing when you attempt to install your roof by yourself. These errors and minor mistakes will not only increase the cost incurred for something as important as the installation of your roof, but they are also easily avoidable if a professional roofer in Fort Worth, TX is hired for the task.

Safety

Roof installation has the potential of becoming extremely dangerous. Since the installation and repair of a roof is not as simple as following a DIY tutorial step by step, it is not uncommon for people to lose their balance on the slippery surfaces which they have to work on when installing or repairing roofing in Fort Worth, TX. There are also steep slopes which one can easily slip on when installing a new roof.

Professional roofers in Fort Worth, TX have years of experience in the field and know exactly how they are supposed to deal with the surfaces which need to be used when installing or repairing roofing. For a layperson, however, there is a great safety risk involved. Countless cases have been reported where people have fallen from their roofs and faced concussions or other injuries when they were attempting to make repairs which they thought would not be a challenge.

The risk is often underestimated, which is why people get stuck in complex and dangerous situations when installing their roofing by themselves. It is, therefore, recommended that professional roofers in Fort Worth, TX are contacted to take care of any problems relating to your roofing-even if you think you are capable of dealing with them yourself—to minimize the risk.

Warranties and Insurance

When you contact a professional roofer in Fort Worth, TX for the installation or repair of your roof, you will always have the guarantee that your roof is in good hands. Hiring a professional will ensure that your roof will not be sensitive to the harsh weather due to any errors made in your installation. Additionally, warranties given by professionals will mean that you won’t have to worry about your roof even after it has been installed. If any problems arise at a later time, you can always contact the professional roofer to look into the matter.

Another great advantage of hiring a professional for your roof installation or repairs is that they will be responsible for any damages which occur in the installation process. This means that even if the roofer makes any mistakes during the installation, they will take care of the costs.

Sizing and Measurements

Let’s face it. If you are a layperson, chances are that you don’t have the slightest clue about the measurements and sizing of a roof. The good thing is that this won’t be a problem when you hire a professional roofer in Fort Worth, TX for the installation of your new roof.

Sizing and measurements of roofs is not necessarily as simple as when the task is done for a normal room or floor. Roofs generally have slopes and other odd types of surfaces which can be difficult to measure properly. After proper inspection, the professional roofer will be able to recognize which technique and materials will be best for the roof which they are being hired for. Additionally, a professional roofer will most likely be equipped with all of the tools which are required to install roofing efficiently and make it last longer.

Time

The amount of time which you might require to begin to get the hang of your roofing and how it works might be enough for a professional roofer to get the entire job done. The years of experience and expertise of a professional roofer will allow them to install or repair your roof much quicker than you since they will most likely understand the situation completely even if you are not able to express the problem or situation articulately.

Since hiring a roofer is more beneficial than attempting repairs by yourself, it is always a good idea to invest in professionals who are experienced and known to provide quality services. You also get the guarantee of clean and professional work which is always a plus. If you live in Fort Worth, TX and wish to get your roofing repaired or new roofs installed for a commercial setting, contact Anderson Industrial Roofing to get the best quality of service available at an excellent price.

The Beauty of Commercial Roofing in Dallas, TX for 2017

March 28, 2017

types-of-fort-worth-tx-commercial-roof-coating

Often times, we don’t pay attention to the little things that matter in our lives, such as the roofs in our houses and offices that protect us from so many harsh weather conditions. In fact though, a roof is the most important feature of a building but somehow, it is also one of the most neglected. That may be due to laziness, or just a busy schedule of the building owner.

It is highly important nonetheless, for people to educate themselves over such matters because what would you do if the roof of your office fell down, all because you didn’t pay attention to it in ten years? Even though there’s a high chance that this won’t ever happen, you should still consider investing in commercial roofing in Dallas, TX.

Commercial roofing is definitely different than the normal roofing done for houses. Even if you have never heard of commercial roofing, you must have definitely come across them at some point in your life and just didn’t know what they were called.

What is Commercial Roofing?

In simple words though, commercial roofing is a type of building material that is used to bind the roof together, sealing and holding it in place. It is quickly rising in popularity due to the outstanding durability it offers. Commercial roofing in Dallas, TX, also has a number of varieties to choose from, which allows you to pick the option that suits you best. This type of roofing gives you security, durability, and a modernized look for your office, making it the top choice for many people these days.

The fact that so many people have started to install commercial roofing in Dallas TX is mainly because in comparison to normal roofs, they are easier to maintain when the weather is not in your favor. The sturdy roofing protects your structure from unnecessary leaks which can ruin your carpets. Along with that, the roofing gives a much more professional look to the house, changing its appearance in a unique and classy way.

Why Should You Choose Commercial Roofing?

There are plenty of reasons why so many business owners have installed commercial roofing in Dallas, TX in their businesses, because not only do they look neat and modern, but they also give your building an overall polished look, which is impossible to attain with normal roofing options.

The materials used to create commercial roofing in Dallas, TX, are mostly metal and steel while normal roofs are made out of bricks. If you choose to get it installed for your building, you are sure to notice a different and the fact that you won’t have to worry about it for the next thirty years or so is definitely a plus point in this matter.

Types of Commercial Roofing

As mentioned before, there are different types of materials that can be used while installing commercial roofing in Dallas, TX, to update the look of your structure. The three main types are:

Thermoplastic Commercial Roofing: This is probably the most popular type of commercial roofing in Dallas, TX. People prefer this roofing the most due to the fact that it is built with PVC and TPO. The two components make the roof specifically resistant to water so if leaks and cracks in your roof have been a problem for you, you know which one to choose. Thermoplastic roofs also have a really long life span which can cross 40 years with regular maintenance.
Solar Panels: Solar panels have long been known for their amazing capabilities to conserve energy. Photovoltaic solar panels are a step further due to the fact that they can soak up sunlight and extract energy that is so powerful that you could light up a whole building with it.
EPDM: The most durable out of all the types of commercial roofing in Dallas, TX, EPDM roofing is definitely on top of the list. This is because not only is it a lot more easier to install, it is also very easy to look after and maintain in the long run, which makes this a popular choice among people who want to install commercial roofing in Dallas, TX.

Can You Install Commercial Roofing By Yourself?

You might want to install your own roof because it will certainly help you save the cost of hiring a professional contractor or company to get the job done. However, it is still not advisable to install your roof on your own, especially while you’re making the transition from normal roofing to commercial roofing in Dallas TX. These types of roofs are a lot more complicated than normal roofs and you will notice a visible difference in the material of the roofs.

It is always a better idea, and a lot more advisable, to find a good professional contractor or company to do the job for you. Not only will they do a better job, but you can rest assured that the final look will definitely be worth it.

Even though getting commercial roofing installed can become quite costly, it is definitely worth it because you won’t have to worry about the roof above your head for at least the next thirty years, regardless of the type that you choose. If you want to get commercial roofing installed for your building in Dallas TX, contact Anderson Industrial Roofing to get the finest team of professionals and top quality service delivered at a reasonable price.

Which Roofing Structure Is The Best For You In Irving TX?

March 27, 2017

How-to-Find-Out-if-You’ve-Hired-the-Right-Fort-Worth-TX-Roofer

With the winter almost over, almost everyone is wondering what kind of damage the cold weather has inflicted on their roofs. Every year, our roof deteriorates due to the elastic properties present in the roofing membrane – they contract in the winters and expand in the summers. This constant contraction and expansion weakens the roofing membrane and the roof starts cracking and leaks start to appear.

In most cases, minor repairs might solve the problem, but in most cases, in homes where the roofs have been present for more than 20 years, a complete roof overhaul may be required. As there comes a point in time that our roofs become so weak that repairs and maintenance will have a little or no effect on the integrity of the roofing structure. This is exactly why it is imperative that everyone in Irving TX should consider a roofing project before their roofs are damaged beyond repair.

However since it is not every day that a homeowner has to consider a roofing project, they often do not have the degree of knowledge to get this project done effectively. People tend to hire the first contractor they come across and take their religiously follow the contractors advice; this puts them at a disadvantage. Not only is there a chance they are paying higher than the market value, but they also might settle for a roofing structure that does not fit their needs. To solve this dilemma we have carefully articulated a list of roofing structures that you should take into perspective before contacting roofers in Irving TX.

Flat Roofs

This is probably the most common roofing structure in Irving TX. It is extremely popular amongst home owner and commercial property owners alike; it is also used to construct industrial roofing structures as well. The underlining reason behind the popularity of flat roofs is the fact that they can easily be installed within a matter of days. Most roofers in Irving TX can effectively install a flat roof within a short time frame and will also offer their services at an extremely low rate, compared to other structure installation. Besides this flat roofs can easily be maintained and have a life span of 15 – 20 years, this type of roofing structure can often stand the test of time. Flat roofs are constructed using various materials; some of the most popular materials are as follows

EPDM
Felt
GRP
PVC

Each of these materials have their own set of advantages and disadvantages, however most roofers in Irving TX have voiced their opinions and have stated that EPDM is the most effective material when it comes to flat roofs.

Pitched Roofs

Another popular roofing structure that can is present all around Irving TX in residential settings are pitched roofs. These roofs are structurally sound and unlike flat roofs, give the homeowner the freedom to design a roof using different angles. These inclined angles provide a contemporary facet that can truly make any home look beautiful. This type of roofing structure has its own distinctive advantages over other roofing structures; these advantages are the underlining reason behind the immense popularity of these structures. Some of the most prominent advantages are mentioned below,

Long lasting materials are used to construct pitched roofs
Whole array of designs and materials to choose from
Provides excellent attic space
If designed effectively, the angles will ensure that water does not accumulate
Provides a contemporary facet that depicts a warm aura

Although these advantages exonerate the fact that pitched roofs are very effective, they do have certain drawbacks which should be taken into perspective. These drawbacks are as follows,

Requires more labor to install effectively
Requires more time to install
One slight miscalculation in the angles created could affect the integrity of the structure
Most roofers in Irving charge a high fee for such structures
Pitched roofs put immense burden on the homes foundation, so some homes might not be able to sustain such roofing structures

We would recommend seeking advice from numerous roofers in Irving TX before making the decision to install this roofing structure.

Hip Roofs

Hip roofs are becoming more popular every year and are now evolving into one of the most effective roofing structures out there. This type of roofing structure is constructed using four rafters that meet in the middle of the roof to create a pitch. Most roofers in Irving TX recommend using a combination of cross gabled and gabled roofs to increase the durability and effectiveness of the structure. However, they can be constructed on its own as well and most roofers can install this structure within a short time frame. The most profound advantages of hip roof structures are as follows,

Provides excellent water drainage
Excellent for harsh winters as the pitch does not allow any snow to accumulate
Hip roofs can be incorporated in an existing structure without replacing the entire roof
Can endure strong winds due to the perpendicular angle

However, there are certain distinct disadvantages of hip roofs that should be taken into perspective. These disadvantages are mentioned below,

Are more complex to install
Require more labor and materials to construct
Roofers in Irving TX charge a high fee for installation
Requires regular maintenance

Pyramid Roofs

Last but not least are pyramid roofs, as the name implies this structure is created using no vertical sides or gables. They provide a refined facet and can truly transform the design of a house or any building for that matter. Some of the most prominent advantages of pyramid roofing structures are mentioned below,

Incredible resistance to strong winds
Angles ensure that no water accumulates
Provides excellent insulation
Depicts a refined design facet
Most roofers in Irving specialize in pyramid roofing structures

Like everything else in this world there are certain drawbacks of investing in this type of roofing structure. These drawbacks are as follows,

Most roofers in Irving TX will require substantial time to install
Reduced attic space by a huge margin
Drainage issues if the adjacent gutters are not replaced as well

Besides this, there are many other different roofing structures out there that you should consider. We would recommend contacting Anderson Industrial Roofing for your roofing needs in Irving TX.

How Polyurethane is Revolutionizing Roofing in Dallas, TX

March 27, 2017

How-to-Extend-the-Life-of-Roofing-in-Irving-TX

Most homeowners do not have the slightest idea about the trends in roofing and how they have changed over the years. Contrary to popular belief, there are plenty of types of materials which have been used for roofing for decades. Roofing projects include the use of materials such as rubber, thermoplastic, and even metal.

Commercial settings have it the worst where the only viable option to people seems to be metal roofing. This, however, is only due to lack of research and knowledge about other options for roofing in Dallas, TX. Commercial roofers in Dallas, TX will tell you that the latest and most efficient material being used for roofing these days is polyurethane. In fact, roofing has been changed in many different ways since polyurethane was introduced as an option.

Read on to learn more about polyurethane foam roofing in Dallas, TX and how it is revolutionizing the world of roofing.

How is it installed?

If the first thing that comes to your mind when you hear about polyurethane foam roofing in Dallas, TX is heavy machinery and weeks of trouble for handling debris, you’re in for a surprise. In fact, if you have been putting off roofing in Dallas, TX because of bad past experiences and seemingly endless days of installation, you should consider polyurethane foam roofing in Dallas, TX.

The process of the installation of polyurethane foam roofing is fairly simple. A mixture of isocyanate and polyol is made, which is then sprayed with the help of a high-powered spray gun. The next step in the installation of polyurethane foam roofing in Dallas, TX is the application of an elastomeric coating to the surface of the roof.

The best part about the application of this coating is that even though it generally requires the use of power rollers, the task can also be done by hands with ease—that too without compromising on the quality of the finished work. The primary reason of the application of this elastomeric coating is the strengthening of the roofing membrane. Once this coating is applied, the durability and overall robustness of the roof increases as it is granted additional protection against elements which can cause damage and affect the longevity of the roof.

Great finished look

The fact that polyurethane foam roofing in Dallas, TX is a roofing option based on seamless integration makes the finished look very unique and appealing.

Not only does the roof look beautiful as a single unit, but since the foam used as the base of polyurethane foam roofing in Dallas, TX comprises of no seams or joints, the roof acts as a great insulator, preventing the seepage of any water or air. This is one of the major reasons why roofers in Dallas, TX are recommending polyurethane foam roofing to an increasing number of people. This roofing method is guaranteed to protect your structure from those leaks which are uncalled for.

Can be applied to sloping roofs

One of the major advantages of using polyurethane foam roofing in Dallas, TX is that it is not only possible to apply this type of roofing to sloping roofs, but polyurethane is also one of the most efficient types of roofing available for these types of roofs. Some roofers in Dallas, TX even go as far as calling polyurethane foam roofing the perfect solution for slanted and sloping roofs.

A drawback of sloping and slanting roofs is that they tend to accumulate water during the rainy season in Dallas, TX. Not only can this standing water seep into the membrane of the roof and damage the structure itself, but it is also possible for the water to ultimately leak into the house if it remains standing on the roof for too long. This problem, too, can be dealt with by the application of polyurethane foam roofing in Dallas, TX.

Lightweight

Another one of the reasons why roofers in Dallas, TX prefer polyurethane foam roofing and are recommending it to so many people in the city is because it is extremely lightweight. This also makes it ideal for repairing broken roofing structures since polyurethane foam roofing can easily be integrated with the existing roofing, that too, without damaging it at all.

The mixture for polyurethane foam roofing in Dallas, TX can weigh as less as 60 pounds per 100 square feet which is why it is an ideal option not only for repairs, but also for the installation of new roofing.

Protection against heat and thermal shock

In a state like Texas, long summers and high temperatures are not uncommon. This, too, is a problem which can be dealt with by installing polyurethane foam roofing. Not only can harmful UV rays be reflected easily by the coating which is applied during the installation of polyurethane foam roofing, but the coating can also act as a very good insulator, protecting your home or commercial building from heat and temperature fluctuations.

Flexibility

Polyurethane foam roofing can easily bear the expansion and contraction which is required of roofing according to the changes in weather. Every roofing material expands during the warm summer days and contracts in winter. Where most materials end up weakening due to the constant contraction and expansion, polyurethane foam roofing in Dallas, TX can easily sustain all of these required changes which makes it an ideal roofing option in Dallas.

Cost and maintenance

Initially, the cost of installing polyurethane foam roofing in Dallas, TX can seem to be much higher than the alternatives available. The longevity and extremely low labor costs, however, make this a very cost efficient option for roofing in Dallas, TX.

Maintenance is also extremely easy since the only thing which needs to be done in order to repair a damaged polyurethane foam roof is to apply a new coating of foam without removing the old one.

To learn more about polyurethane and how to install it in your own commercial building, contact Anderson Industrial Roofing.

The Superlative Guide on Commercial Roofing Projects in Fort Worth TX

March 24, 2017

Commercial skyscraper roofing contractors

It is that time of the year when every homeowner in Fort Worth TX is considering roofing related services. .Fort Worth has endured an intense winter that has taken quite a toll on the roofs in both commercial and residential settings. Every roofing membrane has elastic components, these components contract in the winters and expand in the summers. With time, this constant contraction and expansion weakens the roofs internal membrane.

Once the roofing membrane has been affected, many different problems might arise such as leaks, cracks and a whole host of other issues. If these issues are not handled appropriately, the damage will get worse and there will come a time when the roof might collapse. This is exactly why every homeowner should consider hiring recognized and reliable roofers in Fort Worth TX.

These roofers will first inspect the location and will then suggest the kind of roofing project that seems most appropriate to them. However, in most cases these roofers will only recommend those projects that will generate the highest profit margin for their business. This is why every commercial property owner should attain a degree of knowledge about the different roofing projects that are dominating the market.

Different Types Of Roofing Projects You Should Consider in Fort Worth Texas

Before contacting one of the acclaimed roofers in Fort Worth TX, it is recommended that every homeowner should first take into consideration the variety of options available. It is recommended that every commercial property owner should first carefully articulate a budget and then take the following structures into perspective.

Thermo plastic

This is probably the most popular roofing structure that commercial property owners invest in. This type of roof is constructed using TPO and PVC, which are extremely reflective components. This type of roof is extremely resistant to weathering and damages such as leaks and cracks. They have an average life span of approximately 25 – 30 years and this can easily be increased with regular maintenance.

EPDM

Another prominent roofing system that is ideal for commercial settings are EPDM roofing structures, this is currently the most cost effective roofing system out there today. It can easily be installed and are used for new and replacement projects alike. This roofing structure is constructed using rubber and other adhesive materials that provide a surface that is extremely resistant to normal wear and tear. Besides this the EPDM can easily be installed without the use of heavy machinery, which makes it ideal for commercial purposes.

Modified Bitumen

This is an asphalt dominated roofing system that is reinforced using top of the line fiberglass or polyester. It is extremely resistant to normal wear and tear, including the damage caused by expansion and contraction. There are two different types of polymer that are used to construct modified Bitumen roofing structures, these include APP and SBS. Most roofers in Fort Worth TX can install this type of roof within a time frame of 2-3 weeks and at an extremely reasonable price.

Built up roof

Another common roofing project that is ideal for commercial settings are built up roofs. These roofs are constructed using multiple piles of fabrics and felts which are laminated together using industrial grade bitumen and coal tar pitch. Once the surface has been laminated an adhesive mixture is applied to the surface to further solidify the mixture and improve its resistance to fluctuations in the weather. Most roofers in Fort Worth construct these roofs and then apply a layer of Polyurethane Foam; this is a mixture of different chemicals and is extremely effective in resisting wear and tear damage.

Metal roofs

This is normally used only in commercial settings as metal roofs have a sophisticated sleek aura. This type of metal roof is constructed using corrugated metal panels that are attached using heavy machinery. Currently metal roofs are dominating the commercial market due to its immense strength, fire resistant properties and durability. However, most roofers in Fort Worth TX will require substantial time to properly install this type of roofing system and will also require heavy machinery. Besides this, many architects prefer metal roofs for commercial buildings as they are available in a variety of shapes, sizes and colors. This gives the architects room to construct a roof according to their desired specifications.

Coated roofs

This is the perfect choice for commercial property owners who are on a tight budget. Instead of completely replacing the roofing membrane, a roofer will simply use an adhesive mixture to extend the life of the existing roofing membrane. Most roofers in Fort Worth TX will use a variety of coats to improve the integrity of the roofs surface; normally they utilize Polyurethane Foam and PVC for coating. This coating of an existing roofing surface can normally be done in a few days and will not require substantial labor. But there is one slight draw back with roof coating, if the roofs internal membrane or is weak then this coat will not be that effective. The coat will deteriorate faster and will not just prove to be a temporary fix rather than a permanent one.

Sustainable roofing systems

Sustainable roofing systems are the ideal choice for commercial property owners who like to save substantial costs on electricity. This type of roofing system is constructed using prismatic skylights, solar panels and light tubes. This provides the building with excellent insulation and the solar panels help reduce energy costs by a huge margin. However, such roofing systems do not come cheap and will require a minimum of 30 days for effective installation. There are many roofers in Fort Worth TX that specialize in such roofing systems and offer installation at different rates. If you are considering this type of roofing membrane, we would recommend contacting at least three roofers in Fort Worth TX to gain insight about the market price of such structures.

Finally all the above can help any commercial property owner understand the different roofing structures out there. We would recommend taking your budget into perspective and choose the structure that best suits the specifications of your roof. Contact us with any questions.