5 Common Roofing Problems You May Have Come Across Where Professional Help Is Needed

June 8, 2017
Unshading-the-Shaded-How-Trees-Can-Damage-Your-Roofing-System-in-Dallas-TX

If you’ve ever had to have a roofing project done, you might have come across some of these problems. There are some issues that low-slope roofing in Dallas, TX can face at any given moment. These issues can be a costly affair to repair. Building owners and maintenance professionals face these painstaking issues all the time. So without further ado, here are some of the common roofing problems in Dallas-Fort Worth.

1.    Bad Installation and quality of service

Roofing that is poorly executed isn’t only a financial burden. It can be a very real cause of reduced roof life. It can also lead to other problems as well. In many instances where the installation is a problem, the roofers are either inexperienced or haven’t performed effectively on the job.

Roof problems may arise if precautions are not taken during installation. The roof doesn’t properly attach and faces adhesion issues if the roof isn’t cleared of debris. The roof needs to be dried and primed for the ideal “sticking” conditions. These things cannot be easily seen by the customer as a roof needs time to dry. Improperly installed roofs stand a greater chance to fail more quickly and need replacement.

The best precaution that can be taken is for roofers to practice their due diligence to make sure that the roof is properly installed. A great roofer takes the necessary precautions in installation to make sure that this issue does not happen.

2.    Leaks – mother of all roofing problems

Five-Common-Roofing-Problems-You-May-Have-Come-Across-Where-Professional-Help-Is-Needed-Roofer-in-Dallas-TX
Roof leaks are one of the most common roofing problems. Leaks can happen at any given moment. Flashing detail that was not properly attached in the course of installation has been known to cause leaks in Built-Up roofs or BUR systems.

The BURs may have many leaks where flashing details (pieces of water-resistant material installed to stop water from flowing in through the roof) end. There may be a small opening that allows water to go through and damage the walls of the house or office building.

Mod-bit roofs also have problems of their own. Many of these roofs are installed using a blow torch. Sometimes there is insufficient insulation material installed under the coping cap, thus allowing water to seep through.

As roofs age, problems are inevitable but thankfully roof coating is also there to prevent unforeseen problems. Leaks in single-ply roofs can occur when there is space between the seams during installation. Poor roof seams will definitely cause leaks, as they will allow the moisture to seep through your roof and into the interior of the building. The membranes will start to pool water without good seams. To avoid this, roofers need to make sure that the seams need to be fastened securely without any gaps.

3.    Improper Maintenance

Home and building owners who do not care for their roof are often faced with financial distress. For a business, there is all the more reason to take care of roof maintenance, because proper roof maintenance can save them from untimely repairs. There is an opportunity cost they might be incurring in addition to the cost of repairs. Maybe a lucrative investment opportunity is passing them by.

Knowing the signs of deteriorating roofing can prevent problems from blowing out of proportion. The main problem is a lack of awareness about roof maintenance. If the owner knows about the problems that may occur, they will try their best not to let them happen in the first place.
Proper maintenance at periodic intervals makes sure that your roofing does not face major problems in the future. Proper maintenance may also be crucial for keeping the warranty. In some cases when the roof is not properly maintained, the warranty may become null and void, resulting in extra costs.

Routine inspections are important because they help catch the signs of roof wear and tear and if there are any underlying issues. Issues like an exposed roofing base, ponding water, chipped roofs etc. can be spotted if one takes the time to look. Finding and fixing these issues ahead of time can save a lot of time and money.

4.    Low-grade Repairs

Incompatible materials used to secure the roof together can result in problems and even cause irreparable damage to the roof. For example, if you want to have a metal roof installed, reliable and experienced roofers would not use caulking or plastic roofing cement for the purpose of securing the shingles together.

Plastic cement may have good use in BUR or mod-bit roofs as it gives good adhesion. The same cannot be said for its use with single-ply. It will ruin the integrity of the membrane. The education and experience of roofers can come in handy in this case. If your roofer knows what material should be used, it saves heaps of problems in installation as well as repairs.

5.    Safety concerns in repairs and installs

Working with hot equipment when installing mod-bit using a torch flame or hot bitumen roofing has to be done under strict regulations for workplace safety. Experienced roofers must know the potential hazards involved, such as hot asphalt causing burns and the fire hazard for the torch kettle and roof when using a torch to secure the mod bit roofing.

When using a flame torch in mod bit installs, there needs to be a fire extinguisher present. To address the health concerns and ensure the safety of the building occupants from cold mod-bit systems, the air intakes should be insulted where the roofing is being done.

A roofer’s job is to perform more than a satisfying job on each of his roofing projects. A roof’s effective life can also be optimized and maximized when installation is done in a proper fashion and routine inspections occur without any hindrance. If you are looking for roofers that have years of experience and are aware of the pitfalls in roofing installation and repairs, contact Anderson Industrial Roofing.

What 7 Attributes Should You Look For In A Reliable Roofer in Fort Worth, TX

June 7, 2017
Polyurethane-Foam-Roofing-Application-by-a-Professional-in-Fort-Worth-TX

What-7-Attributes-Should-You-Look-For-In-A-Reliable-Roofer-in-Fort-Worth-TXSelecting commercial or domestic roofers is not an easy task in the least but it doesn’t have to be difficult as well. Regardless of whether your requirements are as simple as a repair or complex like a replacement of commercial or residential roofing you need to select someone who has years of relevant experience under their belt.

1.    Accreditation, certification and licensing are top concerns

Not only that but they need to be certified, licensed and accredited by authoritative institutions. Accreditations from the better business bureau and the NRCA are a good starting point. Along with these necessary traits, there are some personality attributes to roofers, whether they’re hired for commercial or residential projects, making them a pleasure to work with.
These attributes give you the peace of mind that your project will be completed on time and in the right way. If any issue does arise in the course of the project, the roofers in Fort Worth, TX will handle it responsibly with your consent and input, of course.

After doing your part on due diligence, like the background checks and insurance coverage and referrals for the roofers, you should keep in mind the following attributes before signing on the dotted line, for the best experience with commercial roofers in Fort Worth, TX.

2.    Trust Element

Having someone you can rely on is the first and foremost thing that you have to keep in mind when you are hiring the services of roofers in Fort Worth, TX. The roofers will be at your premises for a span of a few days till the roofing project is complete.

During that time, it is important that they come recommended out of your circle and from other customers’ testimonials. There may be valuable items and documents (if you’re a business) lying around the home or business. Previous homeowner and business’s experiences in testimonials should indicate this element of trust between customer and contractor.

3.    Have an eye for detail

A roofing project in itself is only half of the job. There is cleanup, timing and other factors to consider for the whole project. Your contractors should know what time the project will start in the morning and when it will end.

Other considerations include where the pile of resulting debris will be collected from the job and if the roofers in Fort Worth, TX will have to work on weekends. Questions like these and answers to them should be known or at least well anticipated by the roofing company.

The most important reason for this is that your family or employees will still be there in the building or home while the construction is being done. It may cause them discomfort and even affect productivity. Great roofers in Fort Worth, TX are able to complete the job in the minimum possible time without affecting their quality of work.

4.    They are patient with their customers

Roofing projects can be simple or complicated. In complicated projects, there are different requirements and associated decisions that are often not easy to make. The design of the existing roof may have to be reviewed and compared to the new one if the job is a complete roof redesign.

Some roofers in Fort Worth, TX are pushy and may advertently or inadvertently rush a customer’s decisions. Roofers should ideally be patient with their customers and take adequate time to explain the specifics of the job to them. This enables the customers to make an informed decision, which results in a good customer experience.

A customer experience in the form of a good testimonial holds far greater value than a rushed roofing project where the customer is left feeling dissatisfied.

5.    You can depend on them

Dependability in a service oriented organization goes without question. Dependable roofers in Fort Worth, TX should be aware of the duration of a specific type of roofing project. They should provide you with a gantt chart of the time it would take, according to them, to complete your roofing work.

For a commercial roofing project in particular, a gantt chart would show a great degree of professionalism by a roofer. They should follow up on the gantt chart as well. The time that they have set from the beginning of the project to the end should be followed, keeping the gantt chart as a reference.

There should be no unnecessary delays in the work which could damage your house or business premises in the course of the project. Consistency adds bonus points.

6.    They are effective and efficient communicators

Any service industry player should know how to communicate well and effectively. A roofer’s job requirement is no different. It is essential that roofers in Fort Worth, TX can communicate with the customers well.

If there is a miscommunication or a lock thereof, there can be many unnecessary mistakes that will cost the customers extra to rectify. Not only is the customer dissatisfied, but the roofers themselves face unnecessary burden and stress to rectify the mistakes.

If the roofing company representatives understand your requirements as a customer, they should be able to communicate the same to the roofers. From your first communication to the end of the project there should be minimal communication errors and gaps. There should be no hesitation from either side regarding the specifics of the project.

7.    Their credibility should speak volumes

Roofers in Fort Worth, TX should look and dress professionally when they come to your house on the first day and every subsequent one. Their vehicle should be clean as should they. In addition, the vehicle should display their name, contact and license numbers and any other accreditations as a sign of professionalism and genuineness.

A clean uniform is a sign of professionalism and should definitely not be left out of the equation, especially on the first day.

Visible credibility is overshadowed by financial credibility. Financial credibility is very important. A sign that your hired roofers in Fort Worth, TX are in a tough financial spot, is that they ask for a great portion of the costs straight off the bat. The down payment should not be peculiarly large (more than half means something is grossly wrong).

Ideally there should be a contract written and signed by the parties involved. This contract should outline how much each payment will be and when it will be due.

If you want to hire roofers for an upcoming project who have all these qualities, consider hiring Anderson Industrial Roofers who have years of experience in commercial and residential projects.

Should You Repair Or Replace Roofing Before Selling Your House? | Roofer in Fort Worth, TX

June 6, 2017
Residential slate roofing in Dallas, Texas

When it comes to selling your house, there are a number of things you need to look into. The top-most priority is usually given to getting the best buyer for the house. However, when preparing the house for the viewing, the roofing in Fort Worth, TX plays a crucial role in increasing or decreasing the prospects and market value of your house

The question you might be asking regarding the roofing in Fort Worth, TX of your house is whether you should replace or repair it, whatever fits into the situation. The thought that it is about to be sold anyway and should be the buyer’s problem may come to mind. But if the house you are selling has faulty roofing in Fort Worth, TX then you may want to reconsider. How faulty you might ask. Well, if the roof shingles are peeling away and have suffered serious damage, or rainwater leaks through the roof and drips in a bucket, then you might want to repair or completely replace the roofing in Fort Worth, TX before selling your house.

Other times it can be that the house’s roofing in Fort Worth, TX may have become old but is still functioning well. It is in times like this you might question whether getting the roofing repaired or replaced is worth the money you might be spending.

Increase house appeal

Should-You-Repair-Or-Replace-Roofing-Before-Selling-Your-House-Roofer-in-Fort-Worth-TX
As with most home owners looking to sell their house, they might want buyers to line up and each to offer to pay more than the other. This does not happen if your house is severely damaged, needs repairs, and requires a good load of work around the place. Especially if the buyer is not looking for a house to spend on more than the selling price. A well-maintained and good looking home may attract more buyers and even make it more appealing for them.

This situation also applies to the roofing in Fort Worth, TX. If your whole house is well-maintained except for the roof, it may affect the sale. Adding the right roofing in Fort Worth, TX that suits your house to the best and adds to it can make a difference. If your roof looks damaged or worn out, it might give the impression that you do not care much about the property. This might put potential buyers in doubt as to whether the property is well taken care of and if it is worth investing into.

Buyers may not be looking to spend more than the selling price

It is often the case that most buyers may barely be able to afford the house itself. Sometimes they also call for negotiation. With these buyers, it may be so that they cannot spend more than the set price of the house. Or sometimes buyers may only be looking to get a well maintained place to settle down without the hassle for replacements, repairs, or any other extra work around the house.

This situation can also be applicable in the case of roofing in Fort Worth, TX. If these potential buyers notice that the roof of the house has leakage or is in need of repairs or a replacement, then it may affect the house’s sale or the price to go down. Shingles that are loose or missing may also prove to be a turn-off for prospective buyers.

In these circumstances, it might be better to get some repair work done or get the necessary replacements out of the way so that potential buyers may not be disappointed or turn away from investing in the decision to buy the house.

Get paid for the repair work or replacement through the sale

It may be so that when someone has done a great amount of around the house to make it as well-maintained as it is today then the price of the house’s sale might go up. Just like shopping for items in an air-conditioned shop versus a non-air-conditioned shop might be higher, so can a house’s that had major work done in order to function properly.

If you get the roofing in Fort Worth, TX of your house completely replaced with a new one, or install the one that is recent and popular in the market, or something that enhances the design of the house, or something that may have cost a fortune, then you might add the money to the selling price of the house. You can even mention during your meeting with potential buyers that it is completely new and recently installed or it is of the latest design, whatever might be the case, to make the house look more appealing for them and even have their decision work in your favor.

Does it speed up the selling process?

If you are selling a house that is in need in repairs or replacements particularly if the situation concerns roofing in Fort Worth, TX and potential buyers are aware of the conditions, then they might negotiate for a lower selling price as they would be the one to get the repairs and replacement done after the house has been sold. This just may not work in your favor if you were expecting to receive an amount greater or equal to the selling price that was set.

You can also consider looking at the environment and area the house you are selling is located in. If that area is a buyer’s hub and the number of sales of most houses in the same area has gone up, then you may not want to spend a big fortune on roofing in Fort Worth, TX. Because some buyers may just be too eager to move in and you can leave the decision of repair work and replacement up to them.

If you are indecisive about whether to tune the roof of the house you are selling, you can ask a realtor to help you out in the matter.

For more information regarding roofing, you can visit Anderson Industrial Roofing.

How Roof Coatings Protect Your Roof and Why Are They Cost Effective

June 5, 2017
flat-and-low-slope-roof-types-for-commercial-buildings-in-dallas

Roof coatings are useful for increasing the effective life of your roof if applied properly. They are helpful in making your existing roof stronger and more durable as they offer protection from heat and moisture. They also help in keeping away the harmful effects of the sun’s ultraviolet (UV) rays.

What Causes Roof Aging?

Roofs can deteriorate due to a number of reasons. The three that have the most significant impact are the sun’s ultraviolet rays, infrared radiation and of course, moisture.

Ultraviolet rays from the sun cause a harmful effect on people’s skin that leads to cancer, just imagine what it can do to a roof not protected by roof coatings. The chemical reaction that results due to the exposure of the roof to UV rays, breaks the roof substrate down. When the damage is significant, the roof’s effectiveness in offering protection to the interior of the house or building is severely impacted.

Infrared radiation is the actual heat from the sun. The combined effect of infrared and UV causes the roof to age prematurely. The chemical reaction occurring due to the UV rays is aided by the infrared heat and occurs fast. That is what causes roof failure.

Moisture seeps into the roof substrate causing it to bloat and rot. This causes the effective aging and deterioration of the roofing substrate, making it weak and causing leaks. Moisture, if left to its devices may also cause molds which may spread to the rest of the house by way of spores, causing all sorts of diseases to its inhabitants.

Roof coatings stop these damaging effects to the roof’s substrate and allows the inhabitants to benefit from an extended roof life if applied properly applied.

How Do Roof Coatings Work?

Raise-the-Roof-How-Roof-Coatings-Protect-Your-Roof-and-Why-Are-They-Cost-Effective-Roofers-in-Irving-TXRoof coatings, when applied evenly across a smooth roof substrate reflects the harmful UV rays and infrared heat of the sun. It directs the rays and heat in different directions so as to not damage the building’s roof.

Even in the blistering Texas heat, the building is kept relatively cooler and well insulated from the harsh weather conditions. It also prevents the aging process of the roof from being sped up. Rof coatings are a lighter color and allows reflection to take place easily in comparison to roofs of a darker color and rougher material.

National Roofing Contractors Association (NRCA) figures state that with every 20 degrees Fahrenheit increase of roof temperature, the aging process doubles in intensity. Put this together with the notion of a high reduction in roof temperature due to roof coatings and, in theory, the aging process is reduced considerably due to the roof coating.

Can it Be Applied to Existing Roofs?

Roof coatings can be applied to your existing roofs as well. The condition of your substrate needs to be inspected and replaced if there are any major problems. These problems may include moisture and heat damage which may have weakened your substrate.

Single-ply roofs, metal roofs, asphalt, and many others may be treated with this foam by roofers making the roof stronger and more durable than before. The roofing needs to be done in a proper fashion, however. Any sedimentation and debris should be removed so that the substrate is pure and a thick and even foam coat can be applied.

You can potentially avoid the replacement of your roof as your roof’s life expectancy will be higher when your roof has been restored with polyurethane foam. It will provide roofing sustainability for years to come.

How Are Roof Coatings Cost Effective?

If you have a leaking roof membrane or your roof has aged, you may want to consider having a roof coating installed. They are great for restoring existing roofs. Of course, they need to be maintained properly in order to receive the full extent of benefits from these coatings.

These coatings can be used for many different types of roofs including metal, EPDM, asphalt, and others. There is a seamless membrane if applied properly over your substrate, providing a shield against the elements. Whenever the roof seems to be deteriorating, given that it was properly maintained, it can be recoated every decade or so, without the need to replace the roof altogether. You won’t need to have costly repairs and replacements every time.

UV blocking pigments are used in many elastomeric roof coatings that include polyurethane roofs. These pigments block UV rays and reflect them back into the atmosphere, which keeps the inside of the building cooler and temperatures down.

Just imagine what savings you will have in terms of your HVAC utility bills over the years. So even if the initial investment in the roof coating seems a bit on the pricey side, the payback will happen quickly and easily. The building will be relatively more pleasant than before.

What do these savings mean for a business?

As a business, every single dime of your expenses counts and so does the productivity of your employees. Both of these can be catered to once you treat your roofs with roof coatings. A cooler building will lead to a reduction in your utility bills and make way for increased funds at your disposal for investing in stocks and such.

A relatively cooler environment for your business means that your employees, as well as visiting customers, are relaxed and calm. The productivity of employees in a cooler and calmer office environment is considerably higher. The impression your customers, existing and potential, get from your office will be a positive and lasting one.

If you are convinced that you do need roof coatings for your business, head over to Anderson Industrial Roofing for further information or learn more benefits of applying a roof coating system to your commercial building.

Practicing Caution – Traits of a roofing contractor to watch for in Dallas, TX

May 31, 2017
challenges-risks-and-maintenance-requirements-of-dallas-tx-commercial-roofing

cIf you are a resident of Texas state, then we know it is not easy to face the changing climate all the time. Ranging from earthquakes, tornados, and heavy floods, to the extreme temperatures that come with the storm and other harsh weather conditions, these natural disasters are impossible to resist and hard to survive.

With these natural deteriorations, it is no surprise to actually term Texas as one of the most challenging states of the United States in terms of its weather. This means that every decision that you take gets affected by it. Whether it’s about building a structure or renovating one, you will have to keep these factors in mind beforehand. This is also to ensure the safety and security from the damage that comes in the form of the aftermath.

Speaking of which, a roof is the basic and the most important feature of a building. Hence, you have to make sure that you hire the correct expertise for its installation. Along with that, this vulnerable part of your building also needs consistent and timely repair and maintenance to sustain the deadly climatic conditions. This includes everything that is beyond your control and already happening on the outside.

How to avoid these factors?

Five-Common-Roofing-Problems-You-May-Have-Come-Across-Where-Professional-Help-Is-Needed-Roofer-in-Dallas-TX
To overcome this problem, it is essential to inspect the work of a commercial roofer in Dallas, TX before handing over a major project.

Negligence of the commercial roofer in Dallas, TX in maintaining safety protocols while dealing with the task at hand may leave you with more cost and expense than would actually be needed to finish the project.

Also, any severe injuries due to fires or building damage will eventually cost you millions in claims and other legal affairs that will last for years to come.

But how do you protect yourself from getting into these potential problems? Well, for that, you will have to explore the past performance of a roofer in Dallas, TX. A past performance of a professional is always an indicator of the future performance. Therefore, before giving a major roofing task to a commercial roofer in Dallas TX, we need to educate ourselves with the information that we are going to discuss now. 

The traits of a good commercial roofer in Dallas, TX

While not every commercial roofer in Dallas, TX is out to betray you with the services offered, this is also a fact that the top customer complaints of roofing contractors stem from the contract. When you are hiring a roofer in Dallas, TX, make sure you have adequate knowledge and are opting for a good deal from a reputable service provider.

They are never without license and insurance

The first and the foremost thing that you need to ensure is the business license of the contractor. A contractor who holds a license is the one whose credentials are officially reviewed by the state. In addition to that, the state has approved them to work as a roofer. Not all the commercial roofers in Dallas, TX are properly licensed to take up a roofing project. Therefore, due diligence is required in ensuring this.
Similarly, the contractor must be insured. This may include their liability coverage and workers’ compensation. This will save you from incurring any liability in the situation of an unexpected accident during the project work. Also, this will not only be essential to save yourself, but also for the protection of your investment in your property.

Their offers are upfront and clear in the contract

Every storm in Dallas, TX brings with it the abundance of roofing contractors with the variety of service options. With that, they also offer a knock on the door to give you a free inspection of your roof. For that, they usually ask you to sign a contract as an acceptance of a free inspection. However, in reality, signing that contract not only grants them access to your roof but also authorizes them to contact your insurance company on your behalf.

With that, they can now easily find ‘damage’ and claim it to get the big payout from your insurance company. If approved, this will add a claim on your insurance record. Moreover, this will remain the same even if you change the house. Since nobody likes to claim a damage that needs no fixing, therefore, adequate level of care should be taken before signing such a contract upfront. After all, no one can get access to your building’s roof unless you allow them to.

They apply new techniques and are well-equipped with advanced tools

The roofing techniques develop with the passage of time to cater to the changing needs of a building or a structure. A professional roofer in Dallas, TX, however, never hesitates in applying the new and advanced techniques based on the condition and type of the roofing system. It is important to ensure that your roofing contractor is updated with the latest trends and techniques of carrying out a roofing project. If not, then with the application of the wrong methodology and outdated processes, the contractor is only likely to make your investment suffer in the long run.

In addition to that, a roofing contractor should also be utilizing sufficient safety equipment to carry out the task at hand without any mishap. This is necessary to keep ourselves, our employees and the people around the building as safe as possible. This roof safety equipment may include PPE (personal protection equipment), rail systems, fall protection and fire prevention safety equipment.
 
With the use of the information provided above, you may now carry out your roofing project smoothly and without getting yourself trapped in an undue obligation to fulfill the contract. Hence, if you are currently searching for a commercial roofer in Dallas, TX, that is both, honest and reliable to work on your roofing project, then check out the portfolio of Anderson Industrial Roofing as your first choice. You can trust them with all your roofing needs.

Get rid of the Black Stains on an Asphalt Shingle Roof | Commercial Roofer in Fort Worth, TX

May 30, 2017
Get-rid-of-the-Black-Stains-on-an-Asphalt-Shingle-Roof-Commercial-Roofer-in-Fort-Worth-TX

Let’s put it this way, your commercial building is 10 years old now. The asphalt shingles have started to stain badly due to the heat exposure. Now, is there anything you can do to remove the stains from the asphalt shingles and to prevent them from further staining?

Well, the answer is yes. But for this, all you have to do is continue reading the information provided in this article. This information will not only help you in cleaning the existing black stains but will also guide you on how to prevent the stains in the future by giving out some useful tips. In addition, these are the tips that are commonly applied by professional commercial roofers in Fort Worth, TX.

Why does it happen?

Majority of the commercial building owners face the situation of black stains on the roof surface. Therefore, you may have witnessed ugly dark streaks on your asphalt shingle roof as well. These stains are commonly caused by the spores (airborne) of Gloeocapsa Magma – blue – green algae.

These stains are often mistaken as an accumulation of dirt, mold or mildew or even defective shingles. These unsightly stains may cause little harm to your shingles but these ultimately affect the overall appearance of the building, along with the resale value as suggested by commercial roofers in Fort Worth, TX

What could algae resistant asphalt shingles do for you?

The trend of installing new roofing in Fort Worth, TX is increasing these days. You must have noticed that usually, the algae stains are not present directly under the metal flashing and around the roof vents or chimneys. This is because of the fact that the galvanized sheet metals are coated with zinc and copper which is highly toxic to algae.

However, during the rainy season, the trace amounts of galvanized metals are washed down the roof, hence, inhibiting the algae growth. Moreover, with the increasing trend of hiring commercial roofers in Fort Worth, TX, the roofing manufacturers have started mixing the copper granules with the roofing products. This way, the roofing manufacturers are now able to produce shingles that are algae resistant.

Hence, if you are located in an area that is more prone to algae growth, make sure you specify the particular type of shingle you need when repairing or replacing the roof.

Is chemical cleaning effective to remove algae?

The dark streaks may give a very bad appearance to the roof of your commercial roof but the algae stains are easily removable with adequate cleaning and prevention. However, the algae may frequently return. This problem can be overcome with an occasional roof cleaning practice.

While this may not harm your roof but the repeated and frequent use of harsh chemicals or the erosive aspects of a pressure washing may affect the durability of asphalt shingles. Also, it can damage and shorten their life drastically.

Since majority of the people tend to perform the cleaning of a roof as a DIY project, it is necessary to understand that this is a tough job and should only be handled by a professional and commercial roofer in Fort Worth, TX. Several cleaning products are readily available in the market to perform the job and to specifically remove the algae from the roof’s surface. However, a mixture of bleach, TSP (Trisodium phosphate) and water is always helpful in frequent roof cleaning, to remove the lighter stains.

The most recommended chemical, however, is oxygen bleach. This reduces the effects of darker stains and is less damaging to the environment. But undoubtedly, this will not produce the effective and immediate results as are achievable by hiring a professional commercial roofer in Fort Worth, TX.

The commercial roofers in Fort Worth, TX will not only perform the cleaning of a roof by using the right tools but they also take measures like the installation of zinc and copper coated sheet along all the sides of a roof to prevent the algae from coming back. Since this is installed just below the ridge and in a way that only 2”-4” of the metal is visible on the roof, hence, hiring a commercial roofer in Fort Worth, TX is the only approach that would give you the precise, effective and long lasting results.

Why is it advised to hire a commercial roofer in Fort Worth, TX to remove algae from the roof’s deck?

The cleaning of a roof that is infected with algae may seem like an easy job when you look at the different products available in the market for algae cleaning purposes. However, with that, there are some other factors as well that need your consideration before you move ahead and take up the task on your own.

While many people neglect the safety factors, it is important to understand that working on a roof can be seriously harmful. Moreover, it becomes even more dangerous when the roof surface is wet and slippery. Hence, the roof cleaning should only be done with the help of adequate safety precautions like wearing the proper working shoes, avoiding working on sloppy roofs, using safety ropes where needed and most importantly, avoiding the use of the readily available harsh chemicals as this may end up damaging your skin and eyes severely.

On the contrary, it is always the best approach to call commercial roofers in Fort Worth, TX to perform the task. While most of the people tend to save money by taking the task up on their own, they end up damaging the shingles or the roof surface even more. This would ultimately cost them, even more, than hiring a professional at the first place.

What if it’s too late?

The ugly condition of your building’s roof might tell you a different story, one where it is too late to get the roof fixed. However, if you are still facing the issue, then without any further delay, simply contact Anderson Industrial Roofing as your ultimate solution. Their expert team of professionals is well-versed to handle difficult situations and provide the customer satisfaction that a client deserves.

Using Polyurethane Foam Roofing in Fort Worth, TX – Pros and Cons

May 26, 2017
Signs-that-you-require-a-roofing-service-Roofers-in-Fort-Worth-TX

The roof may just be the most important part of the house, if you look at things in terms of safety and protection. You should be paying extra attention to your roofing needs because they cannot be denied at any cost. Usually, taking care of your roofing needs can be troublesome and people often tend to either mess up in terms of application or in terms of the type of roofing they have and their requirements. The best option that people opt for is using Polyurethane foam roofing in Fort Worth, TX. However, before making a decision, it’s best to understand what exactly you’re getting yourself into.

What is a Polyurethane Foam?

Polyurethane foam roofing in Fort Worth, TX is termed as the ultimate solution to all your roofing needs. It is a two-component liquid that is usually sprayed on the roof to address various problems you could be dealing with. You don’t even have to go through scraping off the previous coat, as long as there isn’t not too much damage, recoating your roof with SPF is a good decision. However, you should be well aware of what exactly you are getting into by using Polyurethane foam roofing in Fort Worth, TX. It is always best to be well researched and keep track of what condition your roof is in especially while living in a place with adverse climates. Here are some of the pros and cons to help you get a clear picture of an SPF:

Why is using a Polyurethane foam be a good decision?

Application

Although you need a professional to handle the proper application of your Polyurethane foam roofing in Fort Worth, TX, it still isn’t that difficult to do. There are two coats that need to be applied for a long-lasting effect and they can easily be applied using a spray. The foam is simply sprayed on the roof which later solidifies to form an effective foam. You can apply this directly onto any roof shape and type without going through any extra trouble to do so.

Long lasting

Polyurethane foam roofing in Fort Worth, TX is very durable and lasts a very long time without a deteriorating of quality. Remember, you will have to reapply a new coat every 10 years or so, depending on how much damage is done to the roof in that time.

Insulation and leakage

Polyurethane foam roofing in Fort Worth, TX is an insulating material that retains the heat of the house during winters and keeps it cool during summers. Because it is applied in the liquid form, it can fill in the gaps and cracks on the previous roof and prevent water from leaking into house. If you fear the foam will be cracked as well then there’s no need to worry because the material is such that it will expand and contract according to external temperatures.

UV protection

The coat applied on top of the Polyurethane foam allows protection from sunlight thereby preventing your house from heating up during hot summer days. This would even give you the advantage of saving money wasted on too much electricity bill because of the use of air conditioning.

Maintenance

Polyurethane foam roofing in Fort Worth, TX doesn’t require you to go through too much trouble for maintenance. Remember to get an inspection done at least twice a year to make sure everything is fine. If maintained properly, the coating can last for a very long period of time.

What can go wrong with a Polyurethane foam?

Application

Although the installation is easy, there are specific conditions at which it can be applied. You need to be careful of the weather because that can affect the installation of Polyurethane foam roofing in Fort Worth, TX which means, frost, moisture, dampness etc. on the roof can affect the application.

Expense

Amongst all other kinds of roofing options, Polyurethane foam roofing in Fort Worth, TX is considered to be the most expensive. Especially the fact that two coats are supposed to be applied doesn’t help much with this problem and to make matters worse, the installation would require an expert contractor which would just add to the budget. It’s definitely considered as one of the highest costing roofing options available.

Maintenance

Although it doesn’t take much to maintain a Polyurethane foam roofing in Fort Worth, TX, you still need to keep a close eye in case a crack forms on it which does not work well with a polyurethane coating. If you do manage to get a crack then it means you should immediately call your professional contractor to fix the problem. It can only be fixed with silicon and a coat on top will not adhere well with the cracks. You need accurate fixing with the help of expert hands to give a long-lasting effect.

Finding the contractor

Polyurethane foam is not cheap and requires an expert to deal with the installation. After all, you want the best outcome for all the money that you’ve paid. Therefore, you need to pay special attention when finding a contractor that you can trust with your polyurethane roofing. Even a certified contractor sometimes is not able to carry out the work properly which is why you need to focus more on getting an experienced contractor for your roof. This can be quite troublesome when you have to decide which one would be the best one to opt for.

Apart from these, the decision of polyurethane roofing is the most recommended especially while living in a place with such adverse climate that tends to put too much damage on your roof. Remember, continuous inspection is important and that is not only in the case of polyurethane roofing. Simply choose a professional contractor and keep their number with you at all times, in case an emergency comes up. If you have trouble trusting someone to deal with your roofing then it’s no issue, you can simply contact Anderson Industrial roofing to deal with all your roof related needs.

Dos and Don’ts of Roofing Every Homeowner Must Know | Roofers in Dallas, TX

May 25, 2017

Roofing in Dallas Texas can be a chore. In this post, we have provided a few do’s and don’ts that will help you along the way to ensure that your roofing is in impeccable condition and delivers returns on your investment for years to come.  Take a look at the Don’ts first, since it will aid in better understanding how the process can be a tad bit complicated. We’ll jump in to the Do’s after that and will give you pointers on how to properly proceed.

The Don’ts

Don’t Attempt a Roofing Project On Your Own

People usually take roofing maintenance into their hands, and this is true if you are getting roofing in Dallas, Texas. People try to work out what needs to be done, but that is a mistake we recommend people should avoid, even for menial tasks. Attempting to do your own roofing can result in voiding product warranties, a severe setback for anyone in any industry.

Specialist contractors for roofing in Dallas Texas have their own set of directions that set them apart from amateur workers, let alone DIYers. Again, consultation and roof estimates that professionals provide are your key to a better, lasting roof.

Don’t Attempt Anything During Rain

Commercial contractors don’t do roofing in the rain. Roof shingles can become quite slippery when it pours. Not only is it impractical to work during the rain for roofers, it is impossible to work on the roof deck—a plywood structure your old shingles are attached to—without exposing the deck to water and causing it to swell.

Contractors bring tarpaulin along with them, which is used to cover any exposed sections of the roof. Work may resume after short showers, and if the roof is dried enough. Long showers, on the other hand, entails that work is postponed for another day. Repairing roofing in Dallas, Texas though is still possible in the rain.

Don’t Break the HA’s Building Codes

Don’t go against the Homeowners Association in roofing in Dallas, Texas. Make sure you know and meet set guidelines from the association before setting up or investing in a roofing plan. Your roofing style and look can be assisted by your chosen contractor as they can provide you needed information on guidelines and further provide style options. Choose your style of roofing with them as well as roofing material options.

Don’t Go For More

Don’t add more layers to the roof. Be sure to get your roofer’s advice, but generally, adding layers to your existing roof will add considerable weight and thus further measures must be taken to ensure that the roof is able to handle the weight.

What You should Do Instead

Do Search For Accredited Roofers

Check with Better Business Bureau (BBB) and Workplace Safety and Insurance board (WSIB) for trusted and well accredited roofing in Dallas, Texas contractors. Using these companies can mean getting the most for your money. The best roofing companies provide their own specialists or handymen that provide better workmanship than independent workers (workers hired for per unit pay work).

Do Inquire About the References

Make further inquiries on references and/or acknowledgments by previous customers and businesses regarding the quality of the work and services they received roofing in Dallas, Texas and other cities and states.

Inquire about everything from the roofer you are working with. Your queries can be directed to get a complete understanding of all the options on the table. This is necessary, as you will learn, each option in roofing in Dallas, Texas and other areas has its own positives and negatives relative to location. Getting what you want is of prime importance, as the roof you’re living under will be the same for at least the next 20 years.

Do Get Regular Checkups

Take consultation from your trusted roofer for roofing in Dallas Texas and other areas and enjoy the benefits that come with these defined checkups (by the roofer). We encourage as well to be informed regarding your roof’s construction from your chosen roofing contractors. Do get the maximum return from them, and understand the scale and scope of the effort put in by going through any reports you receive, further gaining insights you wanted in personally maintaining your roof.

Problem management should not be an issue after you have taken necessary measures and performed regular maintenance at the hands of experts for roofing in Dallas, Texas. The troubles that one will see occurring due to unforeseen or unpredictable circumstances, will be easy to trace and fix and thus save you a lot of hassle and inconveniences.

Do Get Everything in Writing

A relatively simple and straightforward notion, yet one that should not be neglected is making sure to get all project details written down. This is for outlining the limits and extent of the job and a document to refer to should there be any disagreements or different opinions over milestones or tasks down the road.  The document given to should include a complete report of material, labor costs incurred and time to be taken; finally, a job start and finished date should be mentioned.

Do Get Involved

Be part of the entire process, once materials arrive, subject them to your own inspection and scrutiny to guarantee the product you received is new and in the best condition. Keep checking with contracted roof specialists in the job they are doing. At the same time, make sure to heed their advice on the proximity and conduct you should keep during the process. Remember specialists will be clothed in appropriate attire and safety gear that enables them to operate effectively which you don’t get.

Remember, repairing a roof or taking steps to extend its life is always easier than a complete roof replacement. Roof replacement is a costly and time-consuming process that affects your activities and will financially hamper you. We recommend roof coatings as the best alternative to a replacement. Roof coatings require little roof tear off and little maintenance as the years tick by. They are good at forming a seamless waterproof barrier and very reflective, ideal for roofing in Dallas, Texas and other areas.

To have your roofing replaced or repaired by a team of professional roofers in Dallas, TX, contact Anderson Industrial Roofing to get the best quality.

How to Give Your House A Fetching Look By Choosing The Perfect Color For Your Roof | Roofers in Dallas, TX

May 24, 2017
Mistakes-to-avoid-when-hiring-Fort-Worth-TX-Commercial-Roofing-Contractor

Choosing the right roofing in Dallas TX for your home is a tough decision. But that’s just the first step. When you get through that, selecting a color that not only suits your roof but goes with your house perfectly can be tricky. It is similar to choosing the right color combination for your wardrobe, with shoes and jewelry that go perfectly and getting the look right. Does blue go with yellow? White with red? Pink and purple? Questions like these are not limited to just clothes, but can also apply to roofing in Dallas TX.

Why does it matter?

Do you think color is not important especially when it comes to roofing in Dallas TX? Well think again. If you are of the opinion that it can’t make much of a difference, you couldn’t be more wrong. Imagine wearing a purple shirt with yellow pants, and a red cap. Now take a look in the mirror. Are you taken-aback? How so: in a good way or a bad way? It depends on your preferences. Well, choosing the right color for roofing in Dallas TX is similar to this. No one wants people to look at your house and feel revolted.

Have you ever looked at someone and thought that whatever they are wearing does not suit them or that color just does not look right? This is also the case when it comes to roofing in Dallas TX. You just have to have the color that best fits your roofing in Dallas TX. It is like choosing a dress that will bring about your best feature like the color of your eyes. And if you manage to do that, you can be sure that you made the right decision and wouldn’t have to worry about going back on it. And in case of your house, this impression is crucial for making your home stand out from the crowd, both for your personal satisfaction as well as for attracting the right buyers.

Why should it matter?

How-to-Give-Your-House-A-Fetching-Look-By-Choosing-The-Perfect-Color-For-Your-Roof-Roofers-in-Dallas-TX
What happens if you choose the right color for the roofing in Dallas TX of your house or any building for that matter? You will notice that it works and synchronizes with the rest of the structure. It adds to the beauty and décor of not just the building itself but also compliments the surrounding environment. It also reflects your personality and style. And if it’s a public place that requires roofing in Dallas TX, then you can be sure to attract the attention of visitors. The refined design together with an ideal color palette makes for the perfect roofing in Dallas TX to live under.

What to choose?

If you are not sure which color to give your roof according to the house or the design of a building, here are some tips to help you out:

1.    For the average and traditional

If your house comes under the category of being average and/or traditional, and you are looking to choose the right color for its roofing in Dallas TX, go for light colors. For example, if the exterior is painted white, off-white or beige (which is the situation in most cases), then a slate roof light blue green in color would probably be the best option. A tip is to avoid overly colored roofing in Dallas TX if your house comes under this category.

2.    Mediterranean style

It is common for Mediterranean styled houses to have a clay-tiled orange roof especially when the exterior is of something like peach or butterscotch in color.

3.    Contemporary

A red roof for a contemporary home would be best suited especially if the exterior consists of colors like dark blue and white.

4.    Cottage

A green metal roof would not only give the right feel to a cottage house but it will also compliment the chimney and style. Particularly, if the exterior comes under shades of brown.

5.    Simple

Can’t decide on the color for roofing in Dallas TX? Just keep it simple and choose a color that is dark neutral.

6.    Brick or stone

If your house is made of brick or stone, choosing the right color can be tricky. A solid brown would go with a cream-colored exterior. Other options for brick or stone houses include darker shades of brown, sometimes gray, and in some cases even a custom color.

Effects of color

It is common knowledge that different colors around us can have different properties as well as effect on our mood. A simple example is that of black objects that absorb more heat than white ones. So before you chose a color for roofing in Dallas TX it is also important to keep their effects in mind.

1.    Red

Red is said to stimulate the brain and is exciting. Other psychological responses include power, passion, warmth, love, aggression, and danger. Used with other colors, the meaning of the color red transforms. For example, if used together with white, red portrays joy.

2.    White

White has an ability to reflect sunlight and also signifies cheering. Other effects include that of purity, cleanliness, innocence, precision, and sterility. In some cultures, like in India the color white portrays death while in other countries like the U.S. it is a symbol for marriage.

3.    Blue

Blue is said to have a calming effect. It reduces excitement and helps one to concentrate. Since it portrays trust, security, cleanliness, and order, it is used in banks present in the U.S. to represent trust.

4.    Black

Black can be depressing if not used in combination with other colors. It has the effects of power, fear, death, mystery, unhappiness as well as elegance. It is also a symbol for mourning in some cultures.

5.    Brown

The most common color used in roofs, brown can be warming and restful but a suggestion is to use it with other colors to prevent the depressing effect it has when used alone. It symbolizes earth, comfort, endurance, and reliability.
Decide on a color for your roof today and call Anderson Industrial Roofing for services in roofing in Dallas TX.

Don’t Risk It – Tips to Protect your Roof Next Winter | Roofers in Irving, TX

May 22, 2017

As we transit from fall into the winters, snowfall is expected in most areas. However, along with the beautiful sight of falling snow, it also brings some factors that need immediate attention. It is rightly said that winters are more of an occupation than a season.

It is also a common observation that winter season brings with it some detrimental factors that need appropriate attention and measures to avoid the loss. Whether it’s about protection of our dry skin or damage to a structure’s exterior—particularly a roof, the changed weather conditions demand attention.

Following that, it can be said that winter puts a lot of stress on a building’s roof. For instance, the ice, snow, freezing and melting conditions lead to severe problems over time. Therefore, the cleaning and caring of our roofs becomes crucial to maintain a roof’s durability during winters.

However, roofing in Irving, TX is very sensitive to weather conditions mainly because of the use of perishable asphalt material. Whether it’s the construction of a roof or protecting an existing roof during the winter season, it is essential to protect it wisely from hazards like icy conditions and strong winds proactively. Or else, we will only end up hiring roofers in Irving, TX and losing a good amount of money for the lack of care.

Some tips to avoid a roof’s damage during this winter season by professional roofers in Irving, TX

Tips-to-protect-your-Roof-this-winter-Roofers-in-Irving-TXFor your complete guidance, let us discuss some of the common issues faced during winter when It comes to roofing in Irving TX, and a few tips, right from the roofers in Irving, TX, to help protect a roof from  damage during winter. 

The wind damages the roof’s surface

It does not take much for the wind to cause damage to a commercial roof system. Since many flat commercial roofs support the mounted HVAC systems, there is always a pitch to release the water from the roof’s surface. However, during winters, the strong wind allows the moisture to reach underneath the bitumen, sheets and EPDM roofing materials and causes sufficient damage to a roof’s surface.

The roofers in Irving, TX suggest that this problem can be avoided by ensuring the timely inspection of a roof before winter season and also by checking for the places where the seal can be observed (for instance, between the strips of a roofing material). Also, the signs of water damage or rusted flashing/metal fasteners are the indications of a roof’s damage.

Heavy snow buildup affects a roof’s sustainability

The roofing in Irving, TX is never far from facing big snowstorms. This results in heavy build-up of snow on the roofs of the commercial buildings, particularly on flat roof surfaces. Although many commercial buildings keep provision for these damages, but every building faces a challenge when it comes to the maximum weight limit that it can sustain. Therefore, the heavy build-up of the snow over the roof’s surface is a serious concern and puts extreme stress over the structural integrity of a roof.

However, these snow build-ups can now be worked around by opting for a comprehensive maintenance plan for your roof type, as suggested by professional roofers in Irving, TX. 

The ambushed ice dams on the sloping roofs

Just like ponding water, ice dams are also one of the hazards of the winter season. Once the temperature in your area is above freezing, this causes the roof’s snow to melt and go down the sloping roofs. As soon as the snowmelt passes the colder eaves, it freezes again. Hence, if the same cycles continue for several days, it causes the freezing snowmelt to build up and ultimately forming an ice dam which leads to water ponding at the back.

However, since the ponding water leaks along the exterior walls, this indicates the presence of a dam of ice and requires immediate removal of snow to avoid leaking of the water under the roof covering and causing permanent damage. 

Condensation shortens the lifespan of a roof drastically

Condensation is a process that occurs when warm air comes in contact with the cold surface.
As a result, the life span of a roof may be shortened by half due to inadequate ventilation. This will also end up in roof damage and ruin the roof’s deck. Moreover, it supports the ice dams which are itself a hazardous factor in winters and need to be avoided in order to help protect the roof.

As roofers in Irving, TX suggest, this problem can be resolved by ensuring the inspection of roofing in Irving, TX regularly and also by getting the ventilation systems properly in place to reduce the damage. However, neglect in dealing with this issue gives chance to excess water around the seams and over the roofing material, to cause severe damage to a building’s roof. 

What can be done about it?

We know that a roof is an extraordinarily significant part of a building. When we stand in front of our conference room window, marveling at the beautiful sight of snowfall or rain, our roof is protecting our building as well as us while bearing all the weather conditions and hazards, itself.

While very few of us keep a check on these hazards, making sure all is fine above our heads by taking adequate measures, some of us simply neglect the need and assume that things are going fine. Hence, such negligence on our part, results in costing us much more than initially hiring an expertise of a professional roofer in Irving, TX as a precautionary measure.

This insight on the possible issues and tips can help you in understanding the types of issues that are mostly neglected by us. However, it also emphasizes on the fact that an adequate roofing solution comes with the expertise of a professional.

Therefore, if you are located in Irving, TX and need more professional insight to solve your roofing problems, simply explore the portfolio of Anderson Industrial Roofing as your first choice of professional service providers, as they provide exceptional services to solve all kinds of roofing problems.